1
IEC Standard Compliant 1.85mm coaxial connectors
1.85mm Series
Features
1.
IEC Standard Compliant 1.85mm
coaxial connector
(IEC 61169-32)
2.
Compatible with the frequency
range of up to 67GHz
3.
RoHS2 compliant
Applications
Optical transmission devices,
Measuring for data transmission,
Radio communication equipment,
Measuring instruments etc.
D.U.T. details
Network Analyzer
D.U.T Termination
Test Port Cable
HV-P-SF085 with double ended harness
HV-P-SF085 measurement system
2018.7②
Compatible with 67GHz confi gurations
Product Specifi cations
Ratings
Nominal characteristic
impedance
50ø
Operating Temperature
Range
-55ç to +105ç (95% RH or less)
Rated frequency DC to 65GHz
Storage Temperature
Range
-55ç to +50ç (95% RH or less)
Items Specifications Conditions
1. Contact resistance
Center : Less than 4mø
External : Less than 4mø
Measured at less than 100mA
2. Insulation resistance 500Mø min. Measured at 250V DC
3. Withstanding voltage No flashover or breakdown 300V AC for 1 minute
4. Voltage standing
wave ratio
V.S.W.R. : Less than 1.5 DC to 65GHz
5. Mating Cycles
Contact resistance at center : Less than 6mø
External : Less than 6mø
No broken, cracked, or loose parts
500 cycles
6. Vibration resistance
No electrical discontinuity for more than
1µs.
No broken, cracked, or loose parts
Frequency : 10 to 2000Hz, half amplitude : 0.75mm,
Acceleration : 196m/s
2
, 12 cycles in each of 3 axis
directions
7. Shock resistance
No electrical discontinuity for more than
1µs.
No broken, cracked, or loose parts
Acceleration : 980m/s
2
, duration : 6ms,
Wave form : half-sine wave, 3 times in each of
3 directions
8. Moisture resistance of
temperature/humidity
cycle
Insulation resistance : More than 100Mø
(in a high humidity environment)
Insulation resistance : More than 500Mø
(in a dry environment)
No broken, cracked or loose parts
Left for 10 cycles (240 hours) in an environment with
the temperature ranging from -10 to 65°C and the
humidity ranging from 90 to 98%.
9. Temperature cycle No broken, cracked or loose parts
Temperature : 5 cycles for a series of time periods :
_55ç for 30 minutes →
3 minutes →
+105ç for 30 minutes →
3 minutes
10. Salt spray No considerable corrosion Continuous 48 hour cycle in 5% salt water solution
*Measurement of voltage standing wave ratio (V.S.W.R.)
The specified values of the voltage standing wave ratio (V.S.W.R.) noted above, are taken with the test set up shown in the
figure below:
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
Oct.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
