For further information contact your local STMicroelectronics sales office.
September 2012 Doc ID 023551 Rev 2 1/7
1
SPC563M64CAL144/176
SPC563M64CALxx microcontroller family calibration and emulation
system
Data brief
Features
■
Support for LQFP144 and LQFP176 MCU
production packages allowing calibration
systems to be built without requiring
modifications to the standard production
system housing
■
2MByte static RAM organized as 1024K words
by 16 bits
■
On-board latch providing a 16-bit de-
multiplexed bus interface from the
SPC563M64 16-bit multiplexed calibration
interface;
■
Support for Nexus-based debug tools even if
application PCB does not include Nexus
connector
■
Nexus functionality with 12 Message Data Out
(MDO) signals
■
Support for full-feature calibration tools via
availability of comprehensive set of device
signals available on the connectors.
■
ERNI 154819 connector optimized for
calibration
■
High speed CAN transceiver with signals
protection
■
Specifications:
– Board Size 36 x 61.8 mm
– Target connector compatible with
TQPACK144SD and TQPACK176SD
sockets
Description
The SPC563M64CALxx is a calibration and
emulation system supporting the
STMicroelectronics
®
SPC563Mxx family of
automotive microprocessors.
The Calibration Adapter is designed to substitute
the QFP device on an ECU version during engine
calibration.
The complete system consists of a
SPC563M64CAL144/176 board and a
POLYPOD-TQ144/176 Poly-Pod which plugs
directly into the motherboard.
The Calibration Adapter can also be used as
emulation board as the Nexus trace port on
CSP496 allows using the pins for application
purpose.
www.st.com
