DSUT1CSU

Datashield In-Line Surge Protector for Network
and Digital/Leased Lines, T-1, ISDN, 1-Set
RJ11/45/48
MODEL NUMBER: DSUT1CSU
What do you currently have protecting your high-speed RJ45 connection? If the answer is nothing, your
equipment is in danger of being damaged by surges and line noise. Even with protection on your power
line, you are still vulnerable to these power problems on your network connection. Use the DataShield™
DSUT1CSU Network Surge Suppressor to protect your network. It’s ideal for sensitive "U" and "S/T"
interfaces on modems, NT1 devices, CSU/DSUs, terminal adapters and other pieces of high-speed
equipment.
Description
Tripp Lite's DSUT1CSU offers complete surge suppression for equipment on digital and leased lines, T1
and ISDN interfaces. Ideal for the protection of sensitive "U" and "S/T" interfaces on modems, NT1
devices, CSU/DSUs, terminal adapters and other pieces of high-speed equipment. Convenient 8 position
input/output RJ style jacks are RJ11/45/48 compatible, includes 5 inch ethernet patch cable for convenient
placement at the protected device network connection. Surge suppression is handled with balanced
arrays of high-speed avalanche diodes that divert excess energies created by electrostatic discharges,
faulty wiring or lightning away from network interface connections. Tripp Lite network surge suppressors
reduce blown interface ports, garbled network transmissions, system lock-ups and hard equipment failure
by safely shunting dataline surges to ground.
SUPPRESSION: 1 set RJ11/45/48 in/out jacks, protects wires 1-8, 60V clamping
Features
DSUT1CSU offers full surge suppression for CSU/DSU's and other high speed equipment on digital and
leased lines, T1 and ISDN interfaces
Convenient RJ45 input and output connections make for simple installation (RJ45 input/output
connections, pins 1-8, 60V clamping)
5 inch ethernet patch cable enables ideal protection placed as close as possible to the point of use
Surge suppression utilizing high speed avalanche diodes divert excess energies on the network to
ground
Highlights
Complete T1 and ISDN
(RJ11/45/48) surge protection
Protects against the effects of
electrostatic discharge, faulty
wiring and lightning
Package Includes
DSUT1CSU dataline protector
5 inch RJ45 patch cable
Instruction manual and warranty
information
1 / 3
Specifications
OVERVIEW
UPC Code 037332010872
OUTPUT
Output Receptacles (1) Network
Circuit Breaker (amps) 200
Right-Angle Outlets No
INPUT
Nominal Input Voltage(s) Supported 120V AC; 230V AC
Recommended Electrical Service 120V, 230V
Input Connection Type RJ45
Input Cord Length (ft.) 0
Input Cord Length (m) 0.00
Right-Angle Plug No
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 0
Clamping Voltage (RMS) 60
DATALINE SURGE SUPPRESSION
Telephone/DSL Protection Yes
Telephone/DSL Protection Details 1 line
Cable (Coax) Protection No
Network (Ethernet) Protection Yes
Additional Dataline Protection 1-8
PHYSICAL
Shipping Dimensions (hwd / in.) 6.10 x 2.00 x 3.10
Shipping Dimensions (hwd / cm) 15.49 x 5.08 x 7.87
Shipping Weight (lbs.) 0.20
Shipping Weight (kg) 0.09
WARRANTY
Product Warranty Period
(Worldwide)
Lifetime limited warranty
2 / 3
© 2018 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
3 / 3

DSUT1CSU

Mfr. #:
Manufacturer:
Tripp Lite
Description:
Power Outlet Strips RJ45 PROTECTOR NETWK
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet