LifecyclePhase:
Revision : 3
Expired Period: Forever
Release Date:2014-11-04 08:56:18.0
DATASHEET
Display Surface-mount
EADSD040GA2
8
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Oct 29, 2014
Issue No : DDF-0001847. Rev.3
americas.com
L
)
Time above Liquidus Temperature (t
L
)
-150 seconds
P
)
°C
Time within 5 °C of Actual Peak Temperature: T
P
- 5°C
econds
- Down Rate from Peak Temperature
°C/second max.
Time 25°C to peak temperature
All parameters are maximum body case temperature values and cannot be considered as a soldering profile. The body
case temperature was measured by soldering a thermal couple to the s
oldering point of LEDs.
1.2 (B) Recommend soldering pad
Note: Suggested pad dimension is just for reference only. Please modify the pad dimension based on individual need.
1. Specification described in this document. Above specification may be changed without notice. Everlight Americas
will reserve authority on material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in
these specification sheets. Everlight
Americas assumes no responsibility for any damage resulting from use of the
product which does not comply with the absolute maximum ratings and the instructions included in these
specification sheets.
3. These specification sheets include materials protected under copyright of Everlight
Americas Corporation. Please
don’t reproduce or cause anyone to reproduce them without Everlight
Americas’s consent.
4. ESD (Electrostatic Discharge)
The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.
When handling the products, the following measures against electrostatic discharge are strongly
recommended:
Eliminating the charge
Grounded wrist strap, ESD footwear, clothes, and floors
Grounded workstation equipment and tools
