171224J400N-F Datasheet 171334K400O-F, 171224J400N-F, 171473J630H-F | P1-P3

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 171 Radial Leaded Metallized Polypropylene

Radial Box Metallized Polypropylene Capacitors

Type 171 radial leaded, box, metallized polypropylene

capacitors are available in ve pitch sizes and have a

ame retardant case and epoxy encapsulant that meets

UL94V-0. The Type 171 is an excellent choice for

applications requiring low dielectric losses, high in-

sulation resistance in an AC or DC environment. The

polypropylene direlectric gives this capacitor excellent

pulse rise time (dv/dt) performance.

Highlights

• High dv/dt

• Low leakage

• Radial leaded (7.5, 10, 15, 22.5, 27.5 mm pitch)

• Flame retardant case and encapsulant meets

UL94V-0

• Non-inductively wound

Specications

Capacitance Range:

Voltage Range:

Capacitance Tolerance:

Operating Temperature Range:

Dielectric Withstand Voltage:

Dissipation Factor (DF):

0.0022 to 3.3 µF

160 to 630 Vdc (90 to 250 Vac, 60 Hz)

±5%, ±10%, ±20%

–55 ºC to +105 ºC (

derate linearly to 50% rated

voltage from 85 ºC to 105 ºC)

1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC

tgd x 10

–4

at +25 ºC ±5 ºC

kHz C ≤0.1 µF 0.1 µF <C ≤1 µF C >1 µF

1 ≤6 ≤6 ≤6

10 ≤10 ≤20 —

100 ≤30 — —

Insulation Resistance:

Self Inductance:

Life Test:

Damp Heat Test:

Soldering:

Long Term Storage Stability:

Maximum Pulse Rise Time dv/dt (V/µ):

100,000 MΩ x µF, 200,000 MΩ Min.

2 mm lead length - total self inductance

Lead Spacing (Pitch)

Vn 7.5 10 15 22.5 27.5

160 5.5 4 2 1.5 1

250 15 11 7 4 3

400 35 20 10 5.5 5

630 55 30 15 8 7

If the working voltage (V) is less than the nominal voltage (Vn), the capaci-

tor can work at higher dv/dt . In this case, the maximum value allowed

is obtained by multiplying the above value (See table dv/dt) with the ratio

Vn/V

2000 hrs @ 85 ºC 1.25 x Vn

95% RH @ +40 ºC for 56 days

260 ºC ±5 ºC for 10 s ±1 s

ΔC/C ≤ ±0.5% after 2 years

Pitch (mm) 7.5 10 15 22.5 27.5

L (nH) ≈ 8 9 10 18 18

RoHS Compliant

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 171 Radial Leaded Metallized Polypropylene

Outline Drawing

Ratings

Cap

(µF)

Inches (mm)

ESR (mΩ)

20 kHz to

100 kHz

IRMS (Amps)

Catolog

Part Number L Max T Max H Max S (Pitch) Ød 25 ºC 45 ºC 85 ºC

160 Vdc / 90 Vac 60 Hz

0.033 171333*160B-F 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)

Not applicable. These

capacitance values are not

customarily used in switched-

mode power supplies

0.047 171473*160B-F 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)

0.047 171473*160C-F 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10) 0.024 (0.6)

0.068 171683*160C7-F 0.413 (10.5) 0.197 (5.0) 0.433 (11.0) 0.295 (7.5) 0.024 (0.6)

0.068 171683*160D-F 0.512 (13.0) 0.197 (5.0) 0.433 (11.0) 0.394 (10.0) 0.024 (0.6)

0.1 171104*160C7-F 0.413 (10.5) 0.197 (5.0) 0.433 (11.0) 0.295 (7.5) 0.024 (0.6)

0.1 171104*160E-F 0.512 (13.0) 0.236 (6.0) 0.472 (12.0) 0.394 (10.0) 0.024 (0.6)

0.15 171154*160D7-F 0.413 (10.5) 0.236 (6.0) 0.472 (12.0) 0.295 (7.5) 0.024 (0.6)

0.15 171154*160E-F 0.512 (13.0) 0.236 (6.0) 0.472 (12.0) 0.394 (10) 0.024 (0.6)

0.22 171224*160F-F 0.709 (18.0) 0.197 (5.0) 0.433 (11.0) 0.591 (15.0) 0.031 (0.8)

0.33 171334*160G-F 0.709 (18.0) 0.236 (6.0) 0.472 (12.0) 0.591 (15.0) 0.031 (0.8)

0.47 171474*160H-F 0.709 (18.0) 0.295 (7.5) 0.531 (13.5) 0.591 (15.0) 0.031 (0.8) 37 3.7 3.1 1.4

0.68 171684*160L -F 1.043 (26.5) 0.236 (6.0) 0.591 (15.0) 0.886 (22.5) 0.031 (0.8) 33 4.1 3.5 1.6

1.0 171105*160N-F 1.043 (26.5) 0.335 (8.5) 0.669 (17.0) 0.886 (22.5) 0.031 (0.8) 26 5.5 4.7 2.6

1.5 171155*160O-F 1.043 (26.5) 0.394 (10.0) 0.748 (19.0) 0.886 (22.5) 0.031 (0.8) 20 6.1 5.1 3.1

2.2 171225*160P-F 1.26 (32.0) 0.433 (11.0) 0.787 (20.0) 1.083 (27.5) 0.031 (0.8) 18 6.3 5.7 3.3

3.3 171335*160Q-F 1.26 (32.0) 0.512 (13.0) 0.886 (22.5) 1.083 (27.5) 0.031 (0.8) 16 7.4 6.4 3.6

250 Vdc / 90 Vac 60 Hz

0.015 171153*250B-F 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)

Not applicable. These

capacitance values are not

customarily used in switched-

mode power supplies

0.022 171223*250B-F 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)

0.022 171223*250C-F 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10) 0.024 (0.6)

0.033 171333*250C-F 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10) 0.024 (0.6)

0.047 171473*250D-F 0.512 (13.0) 0.197 (5.0) 0.433 (11.0) 0.394 (10) 0.024 (0.6)

0.068 171683*250E-F 0.512 (13.0) 0.236 (6.0) 0.472 (12.0) 0.394 (10) 0.024 (0.6)

* indicates capacitance tolereance, J = ±5%, K = ±10%, M = ±20%

RoHS Compliant

Max

±0.016

(±0.4 mm)

217 ±.039

(5.5 ±1.0 mm)

Ød

±0.003

(±0.076 mm)