THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
2
MAX SWAY
(EITHER DIRECTION)
DO NOT
SCALE FROM
THIS PRINT
SMM-1XX-XX-XX-D-XX-XX-X-XX
No OF POS PER ROW
THROUGH HOLE: -01 THRU -40
SURFACE MOUNT: -02 THUR -40
ROW OPTION
-D: DOUBLE ROW
(USE SMM-XX-D-S)
LEAD STYLE
-01: THROUGH HOLE
(C-56-01-X)
-02: SURFACE MOUNT
(C-56-02-X)
PLATING OPTION
-S: 30μ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-F: 3μ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-H: 30μ" HEAVY GOLD IN CONTACT AREA,
3μ" GOLD ON TAIL
-L: 10μ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-SM: 30μ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-FM: 3μ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
OPTION
-TR: TAPE & REEL
MAX. POSITIONS AVAILABLE:
27 VERTICAL/ 28 HORIZONTAL
(SEE SHEET 3)
OPTION 1
-LC: LOCKING CLIP( USE 2 LC-05-TM)
(AVAILABLE ONLY WITH LEAD STYLE -02)
(SEE NOTE 5 & 12)(SEE FIG 5, SHT 2)
POLARIZING OPTION
INDICATE POSITION
(USE PK-07-N)
OPTION 2
-P: PICK & PLACE PAD
(USE PPP-03, SEE FIG 3, SHT 2)
-K: POLYIMIDE FILM
(USE K-DOT-.217-.313-.005)
(2 POS MIN, SEE FIG 4, SHT 2)
(AVAILABLE ON LEAD STYLE -02 ONLY)
( NO. OF POS. x .0787[2.000])±.005
30.00±0.13
(SEE NOTE 6 & 11)
"A"
"A"
01
02
C
L
79
80
.080 2.03
REF
.120 3.05
.015 0.38
REF
( NO. OF POS. x .0787[2.000])-.0787[2.000]
(ACCUM TOL. ±.005)
.020 0.51
REF
.140 3.56
REF
C-56-01-X
SMM-XX-D-S
C
C
.0787±.0050 2.000±0.127
.1575 4.001
REF
2
MAX SWAY
(EITHER DIRECTION)
SECTION "A"-"A"
C
L
.130 3.30
IN-PROCESS
-01 SHOWN
C
C
FIG 1
-01: THROUGH HOLE
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [0.3] 2
.XXX:
.005 [0.13]
.XXXX:
.0020 [0.051]
MATERIAL:
2 MM SOCKET STRIP
BY:
SMM-1XX-XX-XX-D-XX-XX-X-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
JOE Z
04/20/2016
3
1
SHEET SCALE: 4:1
INSULATOR: LCP UL 94V-O, COLOR: BLACK
CONTACT:
BeCu
F:\DWG\MISC\MKTG\SMM-1XX-XX-XX-D-XX-XX-X-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. RETENTION FORCE IN BODY TO BE: 1 Ibs. MIN
3. INSERTION FORCE TO BE: 3.0 oz. MAX.
4. WITHDRAWAL FORCE TO BE: 0.5 oz. MIN.
5. "-LC" OPTION FOR A 02 POSITION WILL HAVE ONLY ONE LOCKING CLIP (LC-05-TM).
6. "END WALLS" AFTER CUTTING SHOULD BE .017±.005.
7. FOR -01 LEAD STYLE, LAYER PACKAGE POSITIONS -01 THRU -04.
8. FOR -02 LEAD STYLE WITHOUT PICK & PLACE PAD, LAYER PACKAGE POSITION -02 ONLY.
9. -02 THRU -05 POSITION WITH -K OR -P TO BE PACKAGED IN -TR ONLY. -06 THUR -40 POSITION
AVAILABLE IN TUBE OR -TR PACKAGING.
10. MAXIMUM CUT FLASH: .010[.25].
11. NO FLASH ALLOWED IN SOCKET OR EXTENDING BELOW LEADS.
12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED. THE -LC OPTION IS
NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION BA
