19
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications
at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by
Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any
infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any
patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN9039.5
December 3, 2015
For additional products, see www.intersil.com/product_tree
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The
company's products address some of the largest markets within the industrial and infrastructure, mobile
computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the
respective product information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to
web to make sure you have the latest revision.
DATE REVISION CHANGE
December 3, 2015 FN9039.5 Added Rev History and About Intersil sections.
Updated Ordering Information on page 2.
Updated POD M8.15 to most current version with revision updates as follows:
Updated to new POD format by removing table and moving dimensions onto drawing
and adding land pattern.
Changed in Typical Recommended Land Pattern the following:
2.41(0.095) to 2.20(0.087)
0.76 (0.030) to 0.60(0.023)
0.200 to 5.20(0.205)
Changed Note 1 "1982" to "1994"
ISL6140, ISL6150