OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MCW0406MD3011BP100

P1-P3P4-P6P7-P9
MCW 0406 AT - Precision
www.vishay.com
Vishay Beyschlag
Revision: 24-Mar-16
1
Document Number: 28847
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Precision Wide Terminal Thin Film Chip Resistors
MCW 0406 AT Precision Wide Terminal Resistors are the
perfect choice for most fields of modern professional power
measurement electronics where reliability, stability, power
dissipation, and robust design is of major concern.
Beside extremely high power ratings, the MCW 0406 AT
is characterized by extraordinary temperature cycling
robustness, verified through extensive testing.
The permissible power rating is specified with 250 mW.
Typical applications include power electronics in automotive
and industrial appliances.
FEATURES
• Rated dissipation P
70
up to 250 mW
• Resistance range down to 1
• Superior temperature cycling robustness
• Operating temperature up to 155 °C
• Advanced sulfur resistance verified according to
ASTM B 809
• Superior moisture resistivity
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive
• Industrial
• High power applications
Note
(1)
Please refer to APPLICATION INFORMATION, see next page.
TECHNICAL SPECIFICATIONS
DESCRIPTION MCW 0406 AT
Imperial size 0406
Metric size code RR1016M
Resistance range 1 to 100 k
Resistance tolerance ± 0.1 %
Temperature coefficient ± 15 ppm/K; ± 25 ppm/K
Rated dissipation P
70
(1)
0.25 W
Operating voltage, U
max.
AC
RMS
/DC 50 V
Permissible film temperature,
F max.
(1)
155 °C
Operating temperature range -55 °C to 155 °C
Permissible voltage against ambient
(insulation):
1 min; U
ins
75 V
MCW 0406 AT - Precision
www.vishay.com
Vishay Beyschlag
Revision: 24-Mar-16
2
Document Number: 28847
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Note
• The presented operation modes do not refer to different types of resistors, but actually show examples of different loads, that lead to
different film temperatures and different achievable load-life stability (drift) of the resistance value. A suitable low thermal resistance of the
circuit board assembly must be safeguarded in order to maintain the film temperature of the resistors within the specified limits. Please
consider the application note “Thermal Management in Surface-Mounted Resistor Applications” (www.vishay.com/doc?28844
) for
information on the general nature of thermal resistance.
The resistance value is influenced by the resistance of the terminations. The exact resistance value of the soldered part on the
PCB may deviate depending on e.g. solder quantity, pad layout, and soldering method. The resistance value of the unmounted
part can be verified by a 4-point probe on the top side termination as shown below.
Fig. 1
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
OPERATION MODE STANDARD POWER
Rated dissipation, P
70
0.200 W 0.250 W
Operating temperature range -55 °C to 125 °C -55 °C to 155 °C
Permissible film temperature,
F max.
125 °C 155 °C
Max. resistance change at P
70
for
resistance range, |R/R| after:
1 to 100 k 1 to 100 k
1000 h 0.1 % 0.2 %
8000 h 0.2 % 0.4 %
225 000 h 0.6 % -
600 μm
870 μm
MCW 0406 AT - Precision
www.vishay.com
Vishay Beyschlag
Revision: 24-Mar-16
3
Document Number: 28847
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Products can be ordered using either the PART NUMBER or PRODUCT DESCRIPTION.
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES
MCW 0406 AT
± 25 ppm/K ± 0.1 % 1 to 100 k E24; E192
± 15 ppm/K ± 0.1 % 47 to 100 k E24; E192
PACKAGING
TYPE / SIZE CODE QUANTITY PACKAGING STYLE WIDTH PITCH
PACKAGING
DIMENSIONS
MCW 0406 AT
P1 1000
Tape and reel
cardboard tape acc.
IEC 60286-3, Type 1a
8 mm 4 mm
Ø 180 mm / 7"
P5 5000
PW 20 000 Ø 330 mm / 13"
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: MCW0406MD4641BPW00
TYPE / SIZE VERSION TCR RESISTANCE TOLERANCE PACKAGING
MCW0406 M = AT (Automotive) E = ± 15 ppm/K
D = ± 25 ppm/K
3 digit value
1 digit
multiplier
Multiplier
8 = *10
-2
9 = *10
-1
0 = *10
0
1 = *10
1
2 = *10
2
3 = *10
3
B = ± 0.1 % P1
P5
PW
PRODUCT DESCRIPTION: MCW 0406-25 0.1 % AT PW 4K64
MCW 0406 -25 0.1 % AT PW 4K64
TYPE SIZE TCR TOLERANCE VERSION PACKAGING RESISTANCE
MCW 0406 ± 15 ppm/K
± 25 ppm/K
± 0.1 % AT = Automotive P1
P5
PW
4K64 = 4.64 k
CW0406MD4M 41BPW006
P1-P3P4-P6P7-P9

MCW0406MD3011BP100

Mfr. #:
Buy MCW0406MD3011BP100
Manufacturer:
Vishay
Description:
Thin Film Resistors - SMD .25W 3.01Kohm 0.1% 25 ppm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet