https://www.phoenixcontact.com/pi/products/1413402
04/29/2017Page2/3
Housing-HC-ADV-B10-HHWH-1TTM32-EMC-AL-1413402
Technical data
General
Size B10
Housing type Sleeve housing
Locking type Screw locking
Torque 3 Nm (Locking screw)
Fixing screws M6 (screw head: 5 mm Allen screw)
No. of cable outlets 1
Cable exit straight
Screw connection none
Type of the screw connection 1x M32
Housing material Die-cast aluminum, salt water resistant
Housing surface material Uncoated
Seal material NBR, conductive
Material lock Stainless steel
Assembly instructions
In order to guarantee that the ground conductor contact functions even
when plugged in at an angle, the two panel mounting flanges must have
sufficient electrical contact with the metal mounting panel.
Connection
To ensure optimum shielding, any insulating power coating must be
removed from the profile gasket area on the control cabinet panel.
Tightening torque of locking screw: 3Nm.
Drawings
Dimensional drawing
83
65
32
35
Ø3,6
2)
Ø4,5
1)
Panel cutout
2)
When self-tapping screws are used (Torx® 20, M4)
Dimensional drawing
Dimensional drawing
Approvals
Approvals
Approvals
EAC / GL / UL Recognized / cUL Recognized / cULus Recognized
Ex Approvals
