ORDERING INFORMATION:
01 J16 MX7543SQ/883B
01 L20 MX7543SE/883B
02 J16 MX7543TQ/883B
02 L20 MX7543TE/883B
03 J16 MX7543GTQ/883B
03 L20 MX7543GTE/883B
QUALITY ASSURANCE
Sampling and inspection procedures shall be in accordance with Mil-Prf-38535, Appendix A as
Specified in Mil-Std-883.
Screening shall be in accordance with Method 5004 of Mil-Std-883. Burn-in test Method 1015:
1. Test Condition, A, B, C, or D.
2. T
A
= +125°C, minimum.
3. Interim and final electrical test requirements shall be specified in Table 2.
Quality conformance inspection shall be in accordance with Method 5005 of Mil-Std-883,
Including Groups A, B, C, and D inspection.
Group A inspection:
1. Tests as specified in Table 2.
2. Selected subgroups in Table 1, Method 5005 of Mil-Std-883 shall be omitted.
Group C and D inspections:
a. End-point electrical parameters shall be specified in Table 1.
b. Steady-state life test, Method 1005 of Mil-Std-883.
1. Test condition A, B, C, D.
2. T
A
= +125°C, minimum.
3. Test duration, 1000 hours, except as permitted by Method 1005 of Mil-Std-883.
TABLE 2. ELECTRICAL TEST REQUIREMENTS
Mil-Std-883 Test Requirements Subgroups
Per Method 5005, Table 1
Interim Electric Parameters
Method 5004
1
Final Electrical Parameters
Method 5005
1*, 2, 3
Group A Test Requirements
Method 5005
1, 2, 3
Group C and D End-Point Electrical Parameters
Method 5005
1
* PDA applies to Subgroup 1 only.
------------------------------------- Electrical Characteristics of 19-2453 Rev. B
MX7543/883B Page 6 of 7
