RT9032
®
DS9032-03 August 2012 www.richtek.com
1
©
Copyright 2012 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.
Applications
Mobile Phone
Smart Hand-Held Devices
Digital Still Camera
Battery-Powered Equipments
PCMCIA Cards
Programmable Dual Output Linear Regulator
Ordering Information
Marking Information
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
General Description
The RT9032 is a dual channels, low noise and low dropout
voltage regulator souring up to 300mA at each channel.
The output voltage range is from 1.1V to 3.3V by operating
voltage range from 2.5V to 5.5V.
The output voltages of the RT9032 can be programmed by
setting the voltage of P1 and P2. There are 9 different
voltage settings in one chip. User can choose output
voltages easily by setting P1, P2 to VDD, GND or floating.
The RT9032 offers 3% accuracy, low dropout (330mV
@300mA) and extremely low ground current, only 32μA
per LDO. The shutdown current is near to zero current
which is suitable for battery-powered device. Other
features include current limiting, over temperature
protection and output short circuit protection.
The RT9032 can operate stable with very small ceramic
output capacitors, reducing required board space and
component cost. The RT9032 is available in WDFN-8L
2x2 and WQFN-8L 1.6x1.6 (COL) packages.
Features
Wide Operating Voltage Ranges : 2.5V to 5.5V
Dual LDO Output
Pin Programmable Output Voltage
Low-Noise for RF Application
No Noise Bypass Capacitor Required
Fast Response in Line/Load Transient
Low Quiescent Current of 32
μμ
μμ
μA/LDO
3% High Output Accuracy
Current Limiting Protection
Thermal Shutdown Protection
Short Circuit Protection
Tiny WDFN-8L 2x2 and WQFN-8L 1.6x1.6 (COL)
Packages
RoHS Compliant and Halogen Free
Note :
Richtek products are :
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
` Suitable for use in SnPb or Pb-free soldering processes.
Pin Configurations
(TOP VIEW)
WDFN-8L 2x2
WQFN-8L 1.6x1.6 (COL)
VIN
EN1
VOUT1
VOUT2
P2
EN2
7
6
5
1
2
3
P1
GND
4
8
VIN
EN1
VOUT1
VOUT2
GND
P2
7
6
5
1
2
3
4
8
P1
EN2
G
N
D
9
RT9032
Package Type
QW : WDFN-8L 2x2 (W-Type)
QWA : WQFN-8L 1.6x1.6 (COL) (W-Type)
Lead Plating System
G : Green (Halogen Free and Pb Free)
Output Voltage
A : Combination A
B : Combination B
C : Combination C
D : Combination D
J : Combination J