OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

EVAL-SDP-CS1Z

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16
SDP-S User Guide
UG-291
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
SDP-S Controller Board
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 16
FEATURES
USB-to-serial engine
Peripherals exposed
SPI
TWI/I
2
C
GPIO
USB 2.0 PC connectivity
PC software stack and base firmware provided
GENERAL DESCRIPTION
This user guide describes the EVAL-SDP-CS1Z system
demonstration platform-serial (SDP-S) controller board from
Analog Devices, Inc. The SDP-S controller board is part of the
Analog Devices system demonstration platform (SDP). The
SDP consists of a series of controller boards, interposer boards,
and daughter boards. SDP controller boards provide a means
of communicating with the system under evaluation from the
PC. Interposer boards route signals between two connectors.
Daughter boards are a collection of product evaluation boards
and Circuits from the Lab™ reference circuit boards. The SDP-S
is used as part of the evaluation system for many Analog Devices
components and reference circuits. The primary audience for
this user guide is the system engineer who seeks to understand
how to set up the SDP-S board and begin USB communications
to the PC.
The SDP-S board is designed to be used in conjunction with
various Analog Devices component evaluation boards and
Circuits from the Lab reference circuits as part of a customer
evaluation environment. The SDP-S provides USB connectivity
through a USB 2.0 high speed connection to the computer,
allowing users to evaluate components on this platform from a
PC application. The SDP-S is based on a USB-to-serial engine,
which has SPI, I
2
C, and GPIO lines available, with a 120-pin
small footprint connector.
This user guide provides instructions for installing the SDP-S
hardware (EVAL-SDP-CS1Z board) and software onto a
computer. The necessary installation files are provided with the
evaluation daughter board package. The Getting Started section
provides software and hardware installation procedures, PC
system requirements, and basic board information. The Evaluation
Board Hardware section provides information on the EVAL-
SDP-CS1Z components. The EVAL-SDP-CS1Z schematics are
provided in the Evaluation Board Schematics section.
For more information about the SDP-S board, go to
www.analog.com/sdp.
09916-001
Figure 1. Picture of EVAL-SDP-CS1Z
UG-291 SDP-S User Guide
Rev. A | Page 2 of 16
TABLE OF CONTENTS
Features .............................................................................................. 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Product Overview ............................................................................. 3
Package Contents .......................................................................... 3
Technical or Customer Support.................................................. 3
Analog Devices Web Site ............................................................. 3
Getting Started .................................................................................. 4
PC Configuration ......................................................................... 4
USB Installation .............................................................................4
Powering Up/Powering Down the SDP-S ..................................4
Evaluation Board Hardware .............................................................5
LEDs ................................................................................................5
Connector Details .........................................................................5
Power............................................................................................ 10
Daughter Board Design Guidelines ......................................... 10
Mechanical Specifications ......................................................... 11
Evaluation Board Schematics........................................................ 13
REVISION HISTORY
8/11—Rev. 0 to Rev. A
Removed SDRAM Memory from Features Section ..................... 1
Removed SDRAM Memory from Product Overview Section ... 3
7/11—Revision 0: Initial Version
SDP-S User Guide UG-291
Rev. A | Page 3 of 16
PRODUCT OVERVIEW
The SDP-S board includes the following:
• USB-to-serial engine
• 1 × 120-pin small footprint connector
• Hirose FX8-120P-SV1(91), 120-pin header
• Peripherals exposed
• SPI
• TWI/I
2
C
• GPIO
PACKAGE CONTENTS
The EVAL-SDP-CS1Z board package contains the following:
• EVAL-SDP-CS1Z board
• 1 m USB Standard-A-to Mini-B-cable
Contact the vendor where the SDP-S board was purchased, or
contact Analog Devices if anything is missing.
TECHNICAL OR CUSTOMER SUPPORT
Analog Devices customer support can be reached in the
following ways:
• Visit the SDP homepage at www.analog.com/sdp
• Email processor questions to psa.support@analog.com
• Visit the Analog Devices Wiki page at
www.wiki.analog.com/sdp
• Visit the EngineerZone for community technical support at
ez.analog.com.
• Phone questions to 1-800-ANALOGD
• Contact your Analog Devices local sales office or
authorized distributor.
• Send questions by mail to
Analog Devices, Inc.
Three Technolog y Way
P.O. Box 9106
Norwood, MA 02062-9106
USA
ANALOG DEVICES WEB SITE
The Analog Devices website, www.analog.com, provides
information about a broad range of products—analog
integrated circuits, amplifiers, converters, and digital signal
processors.
Also, note that MyAnalog.com is a free feature of the Analog
Devices website that allows customization of a web page to
display only the latest information about products of interest
to you. You can choose to receive weekly email notifications
containing updates to the web pages that meet your interests,
including documentation errata against all documents.
MyAnalog.com provides access to books, application notes,
data sheets, code examples, and more.
Visit MyAnalog.com to sign up. If you are a registered user,
simply log on. Your user name is your email address.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16

EVAL-SDP-CS1Z

Mfr. #:
Buy EVAL-SDP-CS1Z
Manufacturer:
Analog Devices Inc.
Description:
Other Development Tools EVAL-SDP-CS1Z
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet