209
E5J E5J
Key Description
7 Down key decrements the numeric value in the display.
Pressed for 1 second or more, the display value deceases
by 50 units in a second until the lower-limit value has been
reached.
8 Mode key changes the display mode within display levels.
9 Level key changes the display level when depressed for at
least 2 seconds.
10 Output indicator lights when the control output is ON. It
does not light when the output selector switch is set for a
current output.
11 Stop indicator lights when the temperature controller is not
in operation.
12. Indicator lights when the controller is in remote (on-line)
communication mode.
Key Description
1 Process value indicator displays the present
temperature, parameter being set and error messages.
2 Set value indicator displays the set values, messages and
output value.
3 Indicator lights when alarm output 1 is turned ON.
4 Indicator lights when alarm output 2 is turned ON.
5 Heater burnout indicator lights when a heater burnout is
detected and stays lit until reset.
6 Up key increments the numeric value in the display.
Pressed for 1 second or more, the set value increases by
50 units in 1 second until the upper-limit value has been
reached.
E5AJ without communications
Nomenclature
1. Process value
display
3. Alarm output 1
(ALM1) indicator
8. Mode key
7. Down key
6. Up key
4. Alarm output 2
(ALM2) indicator
5. Heater burnout
(HB) indicator
9. Level key
2. Set value
display
11. Stop (STOP)
indicator
10. Output (OUT)
indicator
E5CJ without communications
1. Process value
display
6. Up key
7. Down key
8. Mode key
10. Output (OUT)
indicator
2. Set value
display
12. Remote (RMT)
indicator
E5EJ with communications
Note:
1. E5AJ and E5EJ models without communications have a Stop
indicator.
2. E5CJ-2HB models have all indicators shown. E5CJ-2 models
have OUT, ALM1 and ALM2 indicators. E5CJ- models have OUT
indicator only.
3. Alarm output 1
(ALM1) indicator
4. Alarm output 2
(ALM2) indicator
5. Heater burnout
(HB) indicator
9. Level key
210
E5J E5J
Connections
E5AJ, E5EJ CONTROLLERS
For current
output
For voltage
output
For relay
output
Control output
RS-232C RS-422 RS-485
Event 1*
Event 2*
Use these terminals
when connecting a
thermocouple.
Use these terminals
when connecting a
platinum RTD.
100 to 240 VAC,
50/60 Hz
4 to 20 mA 12 VDC, 40 mA
E5CJ-2B CONTROLLERS
Two Alarm Outputs, One Event Input, Heater Burnout Alarm
Control output
Event 1*
Use these terminals
when connecting a
thermocouple.
Note:
* Alarm output 1 is ON when the E5AJ/
E5EJ detects a sensor abnormality or
heater burnout.
CT
Alarm
output 1*
Alarm output 2
100 to 240 VAC,
50/60 Hz
12 VDC, 20 mA
4 to 20 mA
Use these terminals
when connecting a
platinum RTD.
Note:
* E5AJ/E5EJ models with communica-
tions do not have an event input.
** Alarm output 1 is ON when the E5AJ/
E5EJ detects a sensor abnormality or
heater burnout.
Alarm output 1**
Alarm output 2
For voltage
output
For relay
output
For current
output
9
E5J E5J
E5CJ-2 CONTROLLERS
Two Alarm Outputs, No Event Input
Control output
Use these terminals
when connecting a
thermocouple.
Use these terminals
when connecting a
platinum RTD.
12 VDC, 20 mA
4 to 20 mA
For voltage
output
100 to 240 VAC,
50/60 Hz
Alarm
output 1
Alarm output 2
E5CJ- CONTROLLERS
No Alarm Outputs, No Event Input
For voltage
output
4 to 20 mA
12 VDC, 20 mA
Use these terminals
when connecting a
platinum RTD.
Use these terminals
when connecting a
thermocouple.
Control output
100 to 240 VAC,
50/60 Hz
For relay
output
For current
output
For relay
output
For current
output
OMRON ELECTRONICS, INC. OMRON CANADA, INC.
One East Commerce Drive 885 Milner Avenue
Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8
1-800-55-OMRON 416-286-6465
Cat. No. GC TC13 08/00 Specifications subject to change without notice. Printed in the U.S.A.

E53-C3

Mfr. #:
Manufacturer:
Description:
Safety Relays CURRENT OUTPUT 4-20
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet