© Semiconductor Components Industries, LLC, 2009
January, 2009 − Rev. 5
1 Publication Order Number:
AMIS−42700/D
AMIS-42700
Dual High Speed CAN
Transceiver
General Description
Controller area network (CAN) is a serial communication protocol,
which supports distributed real−time control and multiplexing with
high safety level. Typical applications of CAN−based networks can be
found in automotive and industrial environments.
The AMIS−42700 Dual−CAN transceiver is the interface between
up to two physical bus lines and the protocol controller and will be
used for serial data interchange between different electronic units at
more than one bus line. It can be used for both 12 V and 24 V systems.
The circuit consists of following blocks:
• Two differential line transmitters
• Two differential line receivers
• Interface to the CAN protocol handler
• Interface to expand the number of CAN busses
• Logic block including repeater function and the feedback suppression
• Thermal shutdown circuit (TSD)
• Short to battery treatment circuit
Due to the wide common−mode voltage range of the receiver inputs,
the AMIS−42700 is able to reach outstanding levels of
electromagnetic susceptibility (EMS). Similarly, extremely low
electromagnetic emission (EME) is achieved by the excellent
matching of the output signals.
Key Features
• Fully compatible with the ISO 11898−2 standard
• Certified “Authentication on CAN Transceiver Conformance (d1.1)”
• High speed (up to 1 Mbit/s in function of the bus topology)
• Ideally suited for 12 V and 24 V industrial and automotive
applications
• Low EME common−mode−choke is no longer required
• Differential receiver with wide common−mode range (±35 V) for
high EMS
• No disturbance of the bus lines with an un−powered node
• Dominant time−out function
• Thermal protection
• Bus pins protected against transients in an automotive environment
• Short circuit proof to supply voltage and ground
SOIC 20
WC SUFFIX
CASE 751AQ
http://onsemi.com
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
ORDERING INFORMATION
Tx0
GND
GND
14
15
16
17
18
19
201
2
3
4
5
6
7
NC
Rx0
Vref1
Rint
EN1
NC
GND
CANL1
CANH1
VCC
8
9
10
13
12
11
AMIS−42700
NC
GND
GND
CANL2
CANH2
Text
EN2
PIN CONFIGURATION
