Semiconductor Components Industries, LLC, 2010
November, 2010 -- Rev. 4
1 Publication Order Number:
NB2969A/D
NB2969A
Low Power, Reduced EMI
Clock Synthesizer
The NB2969A is a versatile spread spectrum frequency modulator
designed specifically for a wide range of clock frequencies. The
NB2969A reduces ElectroMagnetic Interference (EMI) at the clock
source, allowing system wide reduction of EMI of all clock dependent
signals. The NB2969A allows significant system cost savings by
reducing the number of circuit board layers, ferrite beads and
shielding that are traditionally required to pass EMI regulations.
The NB2969A uses the most efficient and optimized modulation
profile approved by the FCC and is implemented by using a
proprietary all digital method.
The NB2969A modulates the output of a single PLL in order to
“spread” the bandwidth of a synthesized clock, and more importantly,
decreases the peak amplitudes of its harmonics. This results in
significantly lower system EMI compared to the typical narrow band
signal produced by oscillators and most frequency generators.
Lowering EMI by increasing a signal’s bandwidth is called ‘spread
spectrum clock generation’.
The NB2969A is targeted towards all portable devices with very
low power requirements like MP3 players, Notebooks and digital still
cameras.
Features
Generates an EMI Optimized Clocking Signal at the Output
Integrated Loop Filter Components
Operates with a 3.3 V / 2.5 V Supply
Operating Current less than 4.0 mA
Low Power CMOS Design
Input Frequency Range: 6.0 MHz to 12 MHz for 2.5 V
Input Frequency Range: 6.0 MHz to 13 MHz for 3.3 V
Generates a 1X Low EMI Spread Spectrum clock of the Input
Frequency
Frequency Deviation 1% @ 10 MHz
Available in TSOP--6 Package (TSOT--23--6)
Pb--Free Package is Available
MARKING
DIAGRAM*
*For additional marking information, refer to
Application Note AND8002/D.
TSOP--6
(TSOT--23--6)
SN SUFFIX
CASE 318G
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
ORDERING INFORMATION
http://onsemi.com
1
6
EOC = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
G = Pb --Free Package
EOCAYWG
G
1
(Note: Microdot may be in either location)
