DP10054P3L
100 Watts
Total Power: 100 Watts
Input Voltage: 90 - 264 Vac
# of Outputs: Single, 54 Volts
SPECIAL FEATURES
Active power factor correction
EN6100-3-2 compliant
Universal AC input
Fully regulated output
Overcurrent, overvoltage and thermal
protection
Constant voltage
Level VI efciency
High MTBF
IEC320 AC receptacle, 3 pin (type C6)
Built in EMI lter (CISPR 22 Class B)
AC input fuse
Efciency complies with European
CoC v.5 Tier 2 & US DoE Level VI
RoHS compliant
POE isolation on output
Meets K.21 enhanced surge
requirements of 6KV Criteria B
SAFETY
UL UL 60950-1
IEC 62368-1
CSA CSA-C22.2 No.60950-1
CB Certicate and report
PSE Denan PSE approval
(Japan)
CCC
CE LVD and EMC
TUV EN60950-1
Electrical Specications
Input
Input range 90 - 264 Vac (wide range)
Frequency 47 - 63 Hz
Inrush current 94 A maximum @ 264 Vac, cold start 25 °C
Input current 1.85 A maximum
Efciency 87% typical
EMI/RFI FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class-B
Safety ground leakage
current
3.5 mA maximum @ 50/60 Hz, 264 Vac input
Output
Maximum power (Po) 100 W
Hold-up time 20 ms. minimum at full load @ 115 Vac
Overvoltage protection Latching type, recycle AC to reset
Overcurrent protection Output short circuit protection auto recover
Overload protection @ 110 - 160% above maximum rating
Thermal protection 105 °C to 120 °C Trip point; output will latch off
Cable/connector
DC cable length 2.5 mm center plug
DC plug center +v
DC plug outer -v
Environmental Specications
Operating temperature -5 °C to +45 °C ambient
Storage temperature -40 °C to +70 °C
Electromagnetic
susceptibility
Designed to meet EN61000-4-2, -4, -5, level 3;
EN61000-4-3, -6, 3 v/m; EN61000-4-8, -11; EN61000-3-2 Class A
Humidity Operating; non-condensing 10% to 90% RH
MTBF demonstrated > 550,000 hours at full load and 25 °C ambient conditions
Data Sheet