THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
LS2-1XX-XX-XX-D-XXX-X
No OF POSITIONS
-05, -10, -15, -20,
-25, -30
(PER ROW)
ROW SPECIFICATION
-D: DOUBLE (USE LS2-XX-D-XX)
LEAD STYLE
-01: THROUGH HOLE
-02: SURFACE MOUNT
(SEE FIG 2)
PLATING SPECIFICATION
-F: FLASH SELECTIVE GOLD
(USE T-1S13-XX-F-2 & C-79-XX-F)
-FM: FLASH SELECTIVE GOLD
MATTE TIN REMAINDER
(USE T-1S13-XX-F-2 & C-79-XX-F)
-L: LIGHT SELECTIVE GOLD
(USE T-1S13-XX-L-2 & C-79-XX-L)
-LM: LIGHT SELECTIVE GOLD
MATTE TIN REMAINDER
(USE T-1S13-XX-L-2 & C-79-XX-L)
-S: SELECTIVE GOLD
(USE T-1S13-XX-S-2 & C-79-XX-S)
-SM: SELECTIVE GOLD
MATTE TIN REMAINDER
(USE T-1S13-XX-S-2 & C-79-XX-S)
-G: GOLD
(USE T-1S13-XX-G-2 & C-79-XX-G)
-H: HEAVY GOLD
(USE T-1S13-XX-H-2 & C-79-XX-H)
-RA1: RIGHT ANGLE-
SHROUD DOWN (SEE FIG 3)
-RA2: RIGHT ANGLE-
SHROUD UP (SEE FIG 4)
[AVAILABLE ONLY ON LEAD STYLE -01]
TAIL OPTION
-K: POLYIMIDE FILM PAD
(USE K-DOT-.246-.375-.005, SEE FIG 5)
[LEAD STYLE -02 ONLY]
-A: ALIGNMENT PIN
(USE LS2-XX-D-XX-A, SEE FIG 6)
[LEAD STYLE -02 ONLY]
-TR: TAPE & REEL
OPTION
.250 6.35
REF
.0197
SQ
0.500
REF (TYP)
(TYP)
2
MAX SWAY
(No OF POS -1) x .07874[2.0000])
.006[.15]
.0787
±.0050
(TYP)
2.000
±0.127
.090 2.286
LS2-XX-D-XX
C
C
C
FIG 1
LS2-110-01-X-D SHOWN
.2075 5.270
REF
((No OF POS x .07874[2.0000])
+.0618[1.570])
.010[.25]
.0787
REF
2.000
(No OF POS -1) x .07874[2.0000] REF
"A"
"A"
02
01
C
SEE NOTE 6
N
N-1
.104 2.642
REF
(TYP)
2
MAX SWAY
.0787
±.0050
(TYP)
2.000
±0.127
SECTION "A"-"A"
CONTACT
C
C
TERMINAL
C
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
2mm TERMINAL/SOCKET COMBO
BY:
LS2-1XX-XX-XX-D-XXX-X
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
4/24/2002
4
1
SHEET SCALE: 3:1
INSULATOR: LCP, COLOR: BLACK
SOCKET: PHOS BRONZE
TERMINAL: PHOS BRONZE
C:\EnterpriseVault\DWG\MISC\MKTG\LS2-1XX-XX-XX-D-XXX-X-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: .003[.08] MAX.
3. MAXIMUM CUT FLASH: .015[.38].
4. MINIMUM PUSHOUT FORCE; TERMINALS: 2 LBS, CONTACTS: .5 LBS.
5. MAXIMUM ALLOWABLE BOW: .002 INCH/INCH AFTER ASSEMBLY.
6. SEE APPLICATION VIEWS (SHEET 3) FOR POSITION 01 LOCATION.
7. ALL PIN TO PIN DIMENSIONS TO BE MEASURED FROM TIP TO TIP.
8. DIMENSION TO BE MEASURED AT BEND.
9. SHEAR TAILS TO DIMENSION SHOWN.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION V
