Document #: 38-07012 Rev. *F Page 4 of 9
Maximum Ratings
Exceeding maximum ratings may shorten the useful life of the
device. User guidelines are not tested.
Supply Voltage................................................–0.5V to +7.0V
DC Input Voltage ..............................–0.5V to + (V
DD
+ 0.5V)
Storage Temperature.................................. –65°C to +125°C
Junction Temperature.................................................. 125°C
Data Retention at Tj = 125°C ................................> 10 years
Maximum Programming Cycles........................................100
Package Power Dissipation......................................250 mW
Static Discharge Voltage
(per MIL-STD-883, Method 3015) ........................... ≥ 2000V
Latch up (per JEDEC 17) ....................................
≥ ±200 mA
Operating Conditions
Parameter Description Min Typ Max Unit
V
DD
Supply Voltage 3.135 3.3 3.465 V
T
A
Commercial Operating Temperature, Ambient 0 – +70 °C
Industrial Operating Temperature, Ambient –40 – +85 °C
C
LOAD_OUT
Max. Load Capacitance – – 15 pF
f
REF
External Reference Crystal 8 – 30 MHz
External Reference Clock
[2]
, Commercial
1–166MHz
External Reference Clock
[2]
, Industrial
1–150MHz
t
PU
Power up time for all VDD's to reach minimum specified voltage (power
ramps must be monotonic)
0.05 – 500 ms
Electrical Characteristics
Parameter Description Conditions
[1]
Min Typ Max Unit
I
OH
Output High Current
[3]
V
OH
= V
DD
– 0.5, V
DD
= 3.3 V 12 24 – mA
I
OL
Output Low Current
[3]
V
OL
= 0.5V, V
DD
= 3.3 V 12 24 – mA
C
XTAL_MIN
Crystal Load Capacitance
[3]
Capload at minimum setting – 6 – pF
C
XTAL_MAX
Crystal Load Capacitance
[3]
Capload at maximum setting – 30 – pF
C
IN
Input Pin Capacitance
[3]
Except crystal pins – 7 – pF
V
IH
HIGH-level Input Voltage CMOS levels,% of V
DD
70% – – V
DD
V
IL
LOW-level Input Voltage CMOS levels,% of V
DD
––30%V
DD
I
IH
Input HIGH Current V
IN
= V
DD
– 0.3 V – <1 10 μA
I
IL
Input LOW Current V
IN
= +0.3 V – <1 10 μA
I
OZ
Output Leakage Current Three-state outputs – – 10 μA
I
DD
Total Power Supply Current 3.3 V Power Supply; 3 outputs at 50 MHz – 35 – mA
3.3 V Power Supply; 3 outputs at 166 MHz – 70 – mA
I
DDS
Total Power Supply Current in
Shutdown Mode
Shutdown active – 5 20 μA
Notes
1. Unless otherwise noted, Electrical and Switching Characteristics are guaranteed across these operating conditions.
2. External input reference clock must have a duty cycle between 40% and 60%, measured at V
DD
/2.
3. Guaranteed by design, not 100% tested.
[+] Feedback