LT1027
8
sn1027 1027fcs
PACKAGE DESCRIPTIO
U
LINEAR TECHNOLOGY CORPORATION 1992
LT/CPI 1101 1.5K REV C • PRINTED IN USA
PART NUMBER DESCRIPTION COMMENTS
LT1019 Precision Series Bandgap Reference, 0.05%, 5ppm/°C Drift 2.5V, 4.5V, 5V, 10V Outputs; Industrial, Military Grades Available
LT1021 Precision Buried Zener Diode Reference, 5V, 7V, 10V Outputs; 8-Pin PDIP, SO, TO-5 Packages;
0.5%, 5ppm/°C Drift Military Grades Available
LT1236 Precision Series Reference, 0.05%, 5ppm/°C Drift 5V, 10V Outputs; 8-Pin PDIP, SO Packages; Industrial Grade Available
LT1460 Micropower Precision Series Bandgap Reference, 2.5V, 5V, 10V Outputs; 8-Pin PDIP, SO, MSOP;
0.075%, 10ppm/°C Drift TO-92 and SOT-23 Packages
LT1461 Low Dropout 3ppm/°C Drift, 0.04% Series Reference 2.5V, SO-8 Package
LT1798 Low Dropout, Micropower Reference 2.5V, 3V, 4.096V, 5V, Adjustable in SO-8
RELATED PARTS
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
(408) 432-1900
●
FAX: (408) 434-0507
●
www.linear.com
S8 Package
8-Lead Plastic Small Outline (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1610)
0.016 – 0.050
(0.406 – 1.270)
0.010 – 0.020
(0.254 – 0.508)
× 45°
0°– 8° TYP
0.008 – 0.010
(0.203 – 0.254)
SO8 1298
0.053 – 0.069
(1.346 – 1.752)
0.014 – 0.019
(0.355 – 0.483)
TYP
0.004 – 0.010
(0.101 – 0.254)
0.050
(1.270)
BSC
1
2
3
4
0.150 – 0.157**
(3.810 – 3.988)
8
7
6
5
0.189 – 0.197*
(4.801 – 5.004)
0.228 – 0.244
(5.791 – 6.197)
DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
*
**
N8 Package
8-Lead PDIP (Narrow .300 Inch)
(Reference LTC DWG # 05-08-1510)
N8 1098
0.009 – 0.015
(0.229 – 0.381)
0.300 – 0.325
(7.620 – 8.255)
0.325
+0.035
–0.015
+0.889
–0.381
8.255
()
0.100
(2.54)
BSC
0.065
(1.651)
TYP
0.045 – 0.065
(1.143 – 1.651)
0.130 ± 0.005
(3.302 ± 0.127)
0.020
(0.508)
MIN
0.018 ± 0.003
(0.457 ± 0.076)
0.125
(3.175)
MIN
12
3
4
876
5
0.255 ± 0.015*
(6.477 ± 0.381)
0.400*
(10.160)
MAX
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.010 INCH (0.254mm)
