Waterfall Accessories
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
©2017 Panduit Corp.
ALL RIGHTS RESERVED.
WACB32--SA-ENG
1/2017
For more information
Visit us at www.panduit.com
Contact Customer Service by email: cs@panduit.com
or by phone: 800.777.3300
• To provide vertical bend radius control for ladder rack rung or stringer (Figure 1), mount waterfall base (Figure 3)
to rung or stringer (Figure 1) with three black Panduit PLT series cable ties (included). When mounting the
base to the stringer, both cable tie windows are used. When mounting the base to a wide rung, only one of the
cable tie windows are used.
• To provide horizontal bend radius when the waterfall base is installed, slide the male attachment slides of the
waterfall wing (Figure 4) from above into the female attachment slots on the outside edge of the waterfall base
(Figure 3).
Note: The waterfall wing can be used for bend radius control on either the right or left side of the base.
• To provide vertical bend radius control on both sides of ladder rack rung, mount double waterfall (Figure 2) to
ladder rack rung (Figure 1) with three black Panduit PLT series cable ties (included).
• Use the Tak-Ty
®
Hook & Loop Cable Tie slots found on the lower portion of both the waterfall base (Figure 3)
and the double waterfall (Figure 2) to secure cable with maximum 3/4" Tak-Ty
®
Hook & Loop Cable Ties.
Part Number Part Description
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
CMW-KIT
Cable management waterfall kit. Provides bend radius control when transferring cables
from standard ladder rack. Kit includes CMWB, two CMWW, and cable ties.
1 10
CMWB
Cable management waterfall base. Used to maintain 1.75" bend radius control vertically
when transferring cable off of ladder rack. Mounts to ladder rack rung or stringer with
standard cross section cable ties (included).
1 10
CMWW
Cable management waterfall wing. Used in conjunction with CMWB to maintain 1.00"
bend radius control horizontally when transferring cable off ladder rack.
1 10
CMW2B
Cable management double waterfall base. Used to maintain 1.75" bend radius control
vertically when transferring cable off of ladder rack. Mounts to ladder rack rung with
standard cross section cable ties (included).
1 10
Stringer
Cable Tie Slots for Attachment to Ladder Rack
Cable Tie Slots (x5)
Female
Attachment Slots
Latch
Male Attachment
Slides
Figure 1
(Ladder Rack)
Figure 2
(CMW2B-Double Waterfall)
Figure 3
(CMWB-Waterfall Base)
Figure 4
(CMWW-Waterfall Wing)
Rung
Ordering Information
Installation Instructions