FRONT
VIEW
RIGHT
SIDE
VIEW
BOTTOM
VIEW
0.77+0.010"
(19.56+0.25)
0.02+0.002"
(0.51+0.05)
0.18+0.015"
(4.57+0.38)
0.140"
(3.56)
MIN
1 2 4 *5 6
0.397+0.010"
(10.16+0.25)
0.240+0.010"
(6.09+0.25)
0.020+0.010"
(0.51+0.25)
0.01+0.002"
(0.25+0.05)
0.035+0.015"
(0.89+0.38)
PIN CONNECTIONS
1. +VIN
2. -VIN
4. -VOUT
5. COM*
6. +VOUT
Notes:
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: ± 0.015"
MATERIAL: Lead material is phosphor bronze; lead
nishis100-300microinchesofmattetinoveranickel
barrier layer of 5-40 microinches.
*Common pin not present on single output models.
MECHANICAL
Internal Power Dissipation ........................................ 450mW
Short Circuit Duration ................................................ Momentary
ABSOLUTE MAXIMUM RATINGS
HPR 1XX C
Device Family
HPR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
RoHS Compliant Version
ORDERING INFORMATION
“SIP” PACKAGE/PINOUT
HPR1XXC Series
0.75 Watt Single Output DC/DC Converters
TDC_HPR1xxC.E01 Page 4 of 4
www.murata-ps.com/support
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2016 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: http://www.murata-ps.com/requirements/
