Evaluation Kit Engineer 2.0
Please read the enclosed manual carefully before using this product
First steps / Getting started
• Commission the wireless switch, as described in the manual.
• Register your evaluation kit at www.cherryswitches.com/energy-harvesting.
• Download the Evaluation Kit 2.0 files from there onto your computer.
• Install the driver.
• Follow the instructions in the installation wizard.
• Connect the receiver to the computer using the USB cable provided.
• A virtual COM port is created in the system.
• Start the radio monitor software („Cherry_EHS-RF_Software/RadioMonitor.exe“).
If start fails, install in addition FrameworkdotNet4.0 (or later version).
• Select the installed COM port.
• Actuate the commissioned wireless switch. The NEXT button is activated.
• Click NEXT and actuate the wireless switch again, the main window is displayed.
Your Energy Harvesting Kit Registration Number is:
Register your evaluation kit by visiting:
www.cherryswitches.com/energyharvesting to receive access to supporting data,
literature and future software updates.
Kp815vS265
Manual
Wireless rocker switch
Volume model generator
Receiver
USB-Cable
Wireless snap switch
Antenna bushing
