ICS83PN625I Data Sheet PROGRAMMABLE FEMTOCLOCK
®
NG LVPECL OSCILLATOR REPLACEMENT
ICS83PN625DKI REVISION A JUNE 2, 2011 4 ©2011 Integrated Device Technology, Inc.
Table 4D. LVPECL DC Characteristics, V
CC
= 3.3V ± 5% or 2.5V ± 5%, V
EE
= 0V, T
A
= -40°C to 85°C
NOTE 1: Outputs termination with 50 to V
CC
– 2V.
Table 5. Crystal Characteristics
Symbol Parameter Test Conditions Minimum Typical Maximum Units
V
OH
Output High Voltage; NOTE 1 V
CC
– 1.3 V
CC
– 0.8 V
V
OL
Output Low Voltage; NOTE 1 V
CC
– 2.0 V
CC
– 1.6 V
V
SWING
Peak-to-Peak Output Voltage Swing 0.6 1.0 V
Parameter Test Conditions Minimum Typical Maximum Units
Mode of Oscillation Fundamental
Frequency 20 25 MHz
Equivalent Series Resistance (ESR) 50
Shunt Capacitance 7pF
ICS83PN625I Data Sheet PROGRAMMABLE FEMTOCLOCK
®
NG LVPECL OSCILLATOR REPLACEMENT
ICS83PN625DKI REVISION A JUNE 2, 2011 5 ©2011 Integrated Device Technology, Inc.
AC Electrical Characteristics
Table 6A. AC Characteristics, V
cc
= 3.3V ± 5%, V
EE
= 0V, T
A
= -40°C to 85°C
NOTE: Electrical parameters are guaranteed over the specified ambient operating temperature range, which is established when the device is
mounted in a test socket with maintained transverse airflow greater than 500 lfpm. The device will meet specifications after thermal equilibrium
has been reached under these conditions.
NOTE: Characterized using a 25MHz, 12pF resonant crystal.
NOTE: Characterized using a crystal.
NOTE 1: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 2: Please refer to the Phase Noise plots.
Table 6B. AC Characteristics, V
cc
= 2.5V ± 5%, V
EE
= 0V, T
A
= -40°C to 85°C
NOTE: Electrical parameters are guaranteed over the specified ambient operating temperature range, which is established when the device is
mounted in a test socket with maintained transverse airflow greater than 500 lfpm. The device will meet specifications after thermal equilibrium
has been reached under these conditions.
NOTE: Characterized using a 25MHz, 12pF resonant crystal.
NOTE: Characterized using a crystal.
NOTE 1: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 2: Please refer to the Phase Noise plots.
Symbol Parameter Test Conditions Minimum Typical Maximum Units
f
MAX
Output Frequency 156.25 625 MHz
t
jit(cc) Cycle-to-Cycle Jitter; NOTE 1 10 ps
t
jit(Ø)
RMS Phase Jitter (Random);
NOTE 2
156.25MHz,
Integration Range: 12kHz – 20MHz
0.348 0.5 ps
250MHz,
Integration Range: 12kHz – 20MHz
0.305 0.5 ps
312.5MHz,
Integration Range: 12kHz – 20MHz
0.338 0.5 ps
625MHz,
Integration Range: 12kHz – 20MHz
0.343 0.5 ps
t
R
/ t
F
Output Rise/Fall Time 20% to 80% 100 350 ps
odc Output Duty Cycle 47 53 %
Symbol Parameter Test Conditions Minimum Typical Maximum Units
f
MAX
Output Frequency 156.25 625 MHz
t
jit(cc) Cycle-to-Cycle Jitter; NOTE 1 12 ps
t
jit(Ø)
RMS Phase Jitter (Random);
NOTE 2
156.25MHz,
Integration Range: 12kHz – 20MHz
0.359 0.5 ps
250MHz,
Integration Range: 12kHz – 20MHz
0.315 0.5 ps
312.5MHz,
Integration Range: 12kHz – 20MHz
0.349 0.5 ps
625MHz,
Integration Range: 12kHz – 20MHz
0.351 0.5 ps
t
R
/ t
F
Output Rise/Fall Time 20% to 80% 100 350 ps
odc Output Duty Cycle 46 54 %
ICS83PN625I Data Sheet PROGRAMMABLE FEMTOCLOCK
®
NG LVPECL OSCILLATOR REPLACEMENT
ICS83PN625DKI REVISION A JUNE 2, 2011 6 ©2011 Integrated Device Technology, Inc.
Typical Phase Noise at 156.25MHz (3.3V)
Typical Phase Noise at 312.5MHz (3.3V)
Noise Power dBc
Hz
Offset Frequency (Hz)
Noise Power dBc
Hz
Offset Frequency (Hz)

83PN625DKILFT

Mfr. #:
Manufacturer:
Description:
IC CLK OSC LVPECL 10VFQFN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet