OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

CS-FF-MJB

P1-P3
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
Fax: 239-561-1025 • www.crystek.com
CRYSTEK
CORPORATION
MICROWAVE
A Division of Crystek Corporation
NOTES:
1.0 Materials
1.1 Body and Clamp Nut: Steel. Corrosion Resistant per ASTM-A582.
UNS No. S30300.
1.2 Center Conductor: Beryllium Copper per ASTM-B196. UNS C17300.
1.3 Solder Ferrule: Brass per ASTM-B16. UNS C36000.
1.4 O-Ring: Silicone Rubber per A-A-59588.
1.5 Dielectric Bead: Polychlorotrifluorethylene (PCTFE) per ASTM-D1430-95. (KEL-F)
2.0 Finishes
2.1 Center Contact and Solder Ferrule: Gold Plate per ASTM-B488 50 Microinches Min. thickness
over Electrolytic Nickel Plate per ASTM-B689 50 Microinches Min. thickness.
2.2 Body and Clamp Nut: Passivated per SAE-AMS-2700.
2.3 O-Ring and Dielectric Bead: None.
3.0 Interface: 2.92mm Socket per CC-2.92mm-SOC. (Meets IEEE-STD-P287. Figure G.4. Except
conductor tolerances and contact recession).
NOTE: Distance from end of cable
center conductor to Ref. Pl is 0.250 (Ref)
Page 1 of 3
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
Fax: 239-561-1025 • www.crystek.com
CRYSTEK
CORPORATION
MICROWAVE
A Division of Crystek Corporation
1.1 Trim Cable as shown.
Step 1
2.1 Install O-ring onto clamp nut where shown and slide clamp nut over cable in orientation
shown.
2.2 Insert cable into solder ferrule until seated and solder to cable braids where shown.
Step 2
3.1 Trim dielectric flush with seating surface of solder ferrule.
3.2 Verify center conductor dimension shown from ferrule seating surface.
Step 3
Page 2 of 3
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
Fax: 239-561-1025 • www.crystek.com
CRYSTEK
CORPORATION
MICROWAVE
A Division of Crystek Corporation
Product Control:
Crystek Part Number:
Revision Level:
Release Date:
Responsible:A K. Piotrowicz
04-Jan-11CS-FF-MJB
NOTE: Distance from end of cable center
conductor to Ref. Pl. is 0.250 (Ref)
4.1 Point cable center conductor as shown.
Step 4
5.1 Insert cable sub-assembly into connector until seated and tighten clamp nut to 25-35 in-lbs.
Step 5
Page 3 of 3
P1-P3

CS-FF-MJB

Mfr. #:
Buy CS-FF-MJB
Manufacturer:
Crydom / Sensata
Description:
RF Connectors / Coaxial Connectors 2.92mm Jack Str. F For IW 1501
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet