HMC633LC4TR Datasheet HMC633LC4, HMC633LC4TR, HMC633LC4TR-R5 | P4-P6

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

DRIVER & GAIN BLOCK AMPLIFIERS - SMT

HMC63 3LC4

v03.0514

GaAs PHEMT MMIC DRIVER

AMPLIFIER, 5.5 - 17 GHz

Absolute Maximum Ratings

Drain Bias Voltage

(Vdd1, Vdd2, Vdd3, Vdd4)

+5.5V

Gate Bias Voltage (Vgg) -3 to 0V

RF Input Power (RFIN)(Vdd = +5 Vdc) +5 dBm

Channel Temperature 175 °C

Continuous Pdiss (T= 85 °C)

(derate 11.08 mW/°C above 85 °C)

0.99 W

Thermal Resistance

(channel to package bottom)

90.23 °C/W

Storage Temperature -65 to +150 °C

Operating Temperature -40 to +85 °C

Vdd (V) Idd (mA)

4.5 177

5.0 180

5.5 182

Note: Amplier will operate over full voltage ranges shown above

Typical Supply Current vs. Vdd

Gain, Power & Output IP3

vs. Gate Voltage @ 11 GHz

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

120

150

180

210

-0.8 -0.78 -0.76 -0.74 -0.72 -0.7 -0.68

Gain

P1dB

Psat

IP3

Idd

GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)

Idd (mA)

Vgg (V)

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

DRIVER & GAIN BLOCK AMPLIFIERS - SMT

HMC63 3LC4

v03.0514

GaAs PHEMT MMIC DRIVER

AMPLIFIER, 5.5 - 17 GHz

Outline Drawing

NOTES:

1. PACKAGE BODY MATERIAL: ALUMINA

2. LEAD AND GROUND PADDLE PLATING: 30-80

MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.

3. DIMENSIONS ARE IN INCHES [MILLIMETERS].

4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-

6. ALL GROUND LEADS AND GROUND PADDLE MUST

BE SOLDERED TO PCB RF GROUND.

Package Information

Part Number Package Body Material Lead Finish MSL Rating Package Marking

[2]

HMC633LC4 Alumina, White Gold over Nickel

MSL3

[1]

H633

XXXX

[1] Max peak reow temperature of 260 °C

[2] 4-Digit lot number XXXX

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

DRIVER & GAIN BLOCK AMPLIFIERS - SMT

HMC63 3LC4

v03.0514

GaAs PHEMT MMIC DRIVER

AMPLIFIER, 5.5 - 17 GHz

Pin Descriptions

Pin Number Function Description Interface Schematic

1, 5 - 8, 11 - 14,

18, 21, 23

N/C

No connection. These pins may be connected to DC/RF

ground. Performance will not be affected.

2, 4, 15, 17 GND

Package Bottom must

be connected to RF/DC ground.

3 RFIN

This pin is AC coupled

and matched to 50 Ohms.

9 Vgg

Gate control for amplier, please follow “MMIC Amplier

Biasing Procedure” Application Note: See application

circuit for required external components.

16 RFOUT

This pin is AC coupled

and matched to 50 Ohms.

24, 22,

20, 19

Vdd1, Vdd2,

Vdd3, Vdd4

Power Supply Voltage for the amplier. See application

circuit for required external components.

Component Value

C1 - C5 100 pF

C6 - C10 1000 pF

C11 - C15 2.2 µF

Application Circuit

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

P1-P3 P4-P6 P7-P8

HMC633LC4TR

Mfr. #:

Buy HMC633LC4TR

Manufacturer:

Analog Devices / Hittite

Description:

RF Amplifier SMT Driver amp, 5.5 - 17 GHz

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

HMC633LC4TR

HMC633LC4TR

Products related to this Datasheet