7
HFBR-1116TZ Transmitter Pin-Out Table
Pin Symbol Functional Description Reference
1 NC No internal connect, used for mechanical strength only
2 V
BB
V
BB
Bias output
3 GND Ground Note 3
4 GND Ground Note 3
5 GND Ground Note 3
6 GND Ground Note 3
7 OMIT No pin
8 NC No internal connect, used for mechanical strength only Note 5
9 NC No internal connect, used for mechanical strength only Note 5
10 GND Ground Note 3
11 V
CC
Common supply voltage Note 1
12 V
CC
Common supply voltage Note 1
13 GND Ground Note 3
14 DATA Data input Note 4
15 DATA Inverted Data input Note 4
16 NC No internal connect, used for mechanical strength only
HFBR-2116TZ Receiver Pin-Out Table
Pin Symbol Functional Description Reference
1 NC No internal connect, used for mechanical strength only
2 DATA Inverted Data input Note 4
3 DATA Data input Note 4
4 V
CC
Common supply voltage Note 1
5 V
CC
Common supply voltage Note 1
6 V
CC
Common supply voltage Note 1
7 GND Ground Note 3
8 NC No internal connect, used for mechanical strength only Note 5
9 NC No internal connect, used for mechanical strength only Note 5
10 OMIT No pin
11 GND Ground Note 3
12 GND Ground Note 3
13 GND Ground Note 3
14 SD Signal Detect Note 2, 4
15 SD Inverted Signal Detect Note 2, 4
16 OMIT No pin
Notes:
1. Voltages on V
CC
must be from the same power supply (they are connected together internally).
2. Signal Detect is a logic signal that indicates the presence or absence of an input optical signal. A logic-high, V
OH
, on Signal Detect indicates
presence of an input optical signal. A logic-low, V
OL
, on Signal Detect indicates an absence of input optical signal.
3. All GNDs are connected together internally and to the internal shield.
4. DATA, DATA, SD, SD are open-emitter output circuits.
5. On metal-port modules, these pins are redened as “Port Connection.”