Description
• 125°C maximum temperature operation
• 7.8mm x 7.0mm x 5.0mm shielded drum core
• Ferrite core material
• Metalized core mounting utilizes board space
• Inductance range from 0.82µH to 470µH
• Current range from 8.57 Amps to 0.368 Amps
• Frequency range up to 1MHz
Applications
• Buck or Boost Inductor
• Noise filtering and output filter chokes
• Battery Power, DC-DC converters
• Notebook power, PDA’s, Hand held computers
• DVD players
• Cellular phones
Environmental Data
• Storage temperature range: -40°C to +125°C
• Operating temperature range: -40°C to +125°C
(range is application specific)
• Solder reflow temperature: +260°C max. for 10 seconds
maximum
Packaging
• Supplied in tape and reel packaging, 1000 per reel
LDS0705 Series
Shielded Power Inductors
Part Number Rated OCL (1) Irms(2) Isat (3) DCR (Ω) K-factor
Inductance µH Amperes Amperes @20°C (4)
(µH) (Typical)
LDS0705-R82M-R 0.82 0.861±20% 7.68 8.57 0.0040 24.8
LDS0705-1R5M-R 1.5 1.42±20%
6.17
6.67 0.0061 19.3
LDS0705-2R2M-R 2.2 2.13±20% 5.06 5.45 0.009 15.8
LDS0705-3R3M-R 3.3 2.97±20% 4.19 4.62 0.013 13.4
LDS0705-4R7M-R 4.7 5.08±20% 3.32 3.53 0.021 10.2
LDS0705-6R8M-R 6.8 6.34±20% 3.11 3.16 0.024 9.2
LDS0705-8R2M-R 8.2 7.75±20% 2.67 2.86 0.033 8.3
LDS0705-100M-R 10.0 9.30±20% 2.54 2.61 0.036 7.6
LDS0705-150M-R 15.0 14.78±20% 2.04 2.07 0.056 6.0
LDS0705-220M-R 22.0 21.53
±20% 1.66 1.71 0.084 5.0
LDS0705-330M-R 33.0 32.50±20% 1.48 1.40 0.107 4.0
LDS0705-470M-R 47.0 45.71±20% 1.21 1.18 0.158 3.4
LDS0705-680M-R 68.0
69.76
±
20% 0.985 0.952 0.240 2.8
LDS0705-820M-R 82.0 83.67±20% 0.850 0.870 0.323 2.5
LDS0705-101M-R 100.0 98.9±20% 0.808 0.800 0.357 2.3
LDS0705-151M-R 150.0 152.0±20% 0.649 0.645 0.554 1.9
LDS0705-221M-R 220.0 216.5±20% 0.584 0.541 0.68 1.6
LDS0705-331M-R 330.0
329.9±20% 0.470 0.438 1.06 1.3
LDS0705-471M-R 470.0
467.0
±20% 0.387 0.368 1.56 1.1
(1) Open Circuit Inductance Test Parameters: 100kHz, 0.1V, 0.0Adc.
(2) Irms: DC current for an approximate ∆T of 30°C without core loss. Derating is
necessary for AC currents. PCB layout, trace thickness and width, air-flow, and
pro
ximity of other heat gener
ating components will aff
ect the temperature rise. It
is recommended that the temperature of the part not exceed 125°C under worst
case operating conditions verified in the end application.
(3)
Isat Amperes peak f
or appro
ximately 15% rolloff (@25°C)
(4) K-factor: Used to determine B p-p for core loss (see graph).
B p-p = K*L*∆I, B p-p(mT), K: (K factor from table), L: (Inductance in µH),
∆I (Peak to peak ripple current in Amps).
(5)
P
ar
t Number Definition: LDS0705-xxx-R
LDS0705 = Product code and size; -xxx = Inductance value in uH;
R = decimal point; If no R is present, third character = # of zeros.
M = Inductance toler
ance +/- 20% -R suffix = RoHS compliant