OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TRF250-120T-RD

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P22
PolySwitch Resettable Devices – Telecommunications & Networking Devices
225
RoHS Compliant, ELV Compliant
12
Terminal material Tin-plated brass, Nickel under-plating
Soldering characteristics EIC 60008-2-58
Test Conditions
Passive aging 60°C, 1000 hours
85°C, 1000 hours
Humidity aging 85°C, 85% RH, 500 hours
Thermal shock 125°C, -55°C (10 times)
Solvent resistance MIL-STD-202, Method 215F
Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded.
TS250/TSV250/TSL250*
Physical Characteristics
Environmental Specifications
* 250V
AC
interrupt products are designed to help equipment pass ITU K.20, K.21, & K.45 recommendations and Telcordia GR-1089 Port Type 2 & 4 requirements.
† 600V
AC
interrupt products are designed to help equipment pass UL60950,TIA-968-A and GR1089 PortType 1, 3 & 5 requirements.
‡ ExcludingTRF600-150 and TRF600-400, which have a coating that is not rated for dielectric withstand and can withstand 500h at 85°C/85% RH or 1000h at 60°C/90% RH.
Lead material Tin-plated copper, 22AWG
Insulating material Cured epoxy polymer
‡
Flammability per IEC 695-2-2 Needle flame test for 20s
Soldering characteristics ANSI/J-STD-002, Category 3
Solder heat withstand IEC-STD 68-2-20,Test Tb, Section 5 Method 1A, Condition B: can withstand 10 seconds at 260°C±5°C
Note:
Devices are not designed to be placed through a reflow process.
TRF600†
Physical Characteristics
Test Conditions
Passive aging 60°C, 1000 hours
85°C, 1000 hours
Humidity aging 85°C, 85% RH, 1000 hours
‡
Thermal shock 125°C, -55°C (10 times)
Solvent resistance MIL-STD-202, Method 215F
Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded.
Environmental Specifications
Operating temperature range for all listed products is -40°C to 85°C, except forTRF250-080T and TRF250-184 (0°C to 85°C)
Table T5
Physical Characteristics and Environmental Specifications for
Telecommunications and Networking Devices
Cont’d
Lead material Tin-plated copper, 22AWG
Insulating material Cured epoxy polymer
Flammability per IEC 695-2-2 Needle Flame Test for 20s
Soldering characteristics ANSI/J-STD-002, Category 3
Solder heat withstand IEC-STD 68-2-20,Test Tb, Section 5 Method 1A, Condition B: can withstand 10 seconds at 260°C±5°C
Note: Devices are not designed to be placed through a reflow process.
Test Conditions
Passive aging 60°C, 1000 hours
85°C, 1000 hours
Humidity aging 85°C, 85% RH, 1000 hours
Thermal shock 125°C, -55°C (10 times)
Solvent resistance MIL-STD-202, Method 215F
Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded.
TRF250*
Physical Characteristics
Environmental Specifications
226
RoHS Compliant, ELV Compliant
12
Test Conditions
Passive aging 60°C, 1000 hours
85°C, 1000 hours
Humidity aging 85°C, 85% RH, 1000 hours
Storage humidity Per IPC/JEDEC J-STD-020A Level 2a
Thermal shock 125°C, -55°C (10 times)
Solvent resistance MIL-STD-202, Method 215J
Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded.
† 600V
AC
interrupt products are designed to help equipment pass UL60950,TIA-968-A and GR1089 PortType 1, 3 & 5 requirements.
Terminal material Tin-plated brass
Insulating material Nylon resin (UL94V-0), 1000V dielectric rating
Flammability IEC 695-2-2 Needle Flame Test for 20s
Soldering characteristics EIC60068-2-58, Method 7
Solder heat withstand IEC-STD 68-2-20,Test Tb, Section 5 Method 1A
TSM600†
Physical Characteristics
Environmental Specifications
Operating temperature range for all listed products is -40°C to 85°C, except forTRF250-080T and TRF250-184 (0°C to 85°C)
Table T5
Physical Characteristics and Environmental Specifications for
Telecommunications and Networking Devices
Cont’d
Test Conditions
Passive aging 60°C, 1000 hours
85°C, 1000 hours
Humidity aging 85°C, 85% RH, 1000 hours
Thermal shock 125°C, -55°C (10 times)
Solvent resistance MIL-STD-202, Method 215F
Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded.
Terminal material Tin-plated brass
Insulating material Nylon resin (UL94V-0), 1000V dielectric rating
Flammability IEC 695-2-2 Needle Flame Test for 20s
Soldering characteristics ANSI/J-STD-002, Category 3
Solder heat withstand IEC-STD 68-2-20,Test Tb, Section 5 Method 1A
TS600†
Physical Characteristics
Environmental Specifications
PolySwitch Resettable Devices – Telecommunications & Networking Devices
227
RoHS Compliant, ELV Compliant
12
Chip* — 250V
AC
TCF250
TCF250-100T 2,500 — 10,000 ——
TCF250-120T 2,500 — 10,000 ——
TCF250-145T 2,500 — 10,000 ——
TCF250-180 2,500 — 10,000 — UL
Radial-leaded* — 250V
AC
TRF250
TRF250-055UT 500 — 10,000 ——
TRF250-080U 500 — 10,000 — UL, CSA,TÜV
TRF250-080U-2 — 1,500 7,500 — UL, CSA, TÜV
TRF250-080T 500 — 10,000 08F UL, CSA, TÜV
TRF250-110U 500 — 10,000 — UL, CSA,TÜV
TRF250-120 500 — 10,000 20F UL, CSA, TÜV
TRF250-120-2 — 1,500 7,500 20F UL, CSA,TÜV
TRF250-120T 500 — 10,000 20F UL, CSA, TÜV
TRF250-120T-2 — 1,500 7,500 20F UL, CSA, TÜV
TRF250-120U 500 — 10,000 20F UL, CSA, TÜV
TRF250-120U-2 — 1,500 7,500 20F UL, CSA, TÜV
TRF250-120UT 500 — 10,000 20F UL, CSA,TÜV
TRF250-145 500 — 10,000 45F UL, CSA, TÜV
TRF250-145-2 — 1,500 7,500 45F UL, CSA,TÜV
TRF250-145-RA 500 — 10,000 45F UL, CSA, TÜV
TRF250-145U 500 — 10,000 45F UL, CSA, TÜV
TRF250-145U-2 — 1,500 7,500 45F UL, CSA, TÜV
TRF250-183 500 — 10,000 83F UL, CSA, TÜV
TRF250-183-2 — 1,500 7,500 83F UL, CSA,TÜV
TRF250-184 500 — 10,000 84F UL, CSA, TÜV
Surface-mount* — 250V
AC
TS250/TSL250/TSV250
TSL250-080F-2 — 1,500 7,500 T08 UL, CSA,TÜV
TS250-130F-2 — 1,500 7,500 T13 UL, CSA,TÜV
TSV250-130F-2 — 1,200 6,000 T13V UL, CSA, TÜV
Radial-leaded
†
— 600V
AC
TRF600
TRF600-150 500 — 10,000 150F UL, CSA,TÜV
TRF600-150-2 — 1,500 7,500 150F UL, CSA, TÜV
TR600-150F-EX 500 — 10,000 150F UL, CSA
TR600-150F-EX-2 — 600 3,000 150F UL, CSA
TR600-150F-EX-RA-B-0.5 500 — 10,000 150F UL, CSA
TRF600-160 500 — 10,000 160F UL, CSA,TÜV
TRF600-160-2 — 600 3,000 160F UL, CSA,TÜV
TRF600-400 500 — 10,000 400F UL, CSA
Surface-mount
†
— 600V
AC
TS600/TSM600
TS600-170F-2 — 300 900 T20 UL, CSA
TS600-200F-RA-2 — 300 900 T20 UL, CSA
TS600-400F-2 — 300 900 T40 UL, CSA
TSM600-250F-2 — 200 1,000 TSM600 UL, CSA
TSM600-250F-RA-2 — 200 1,000 TSM600 UL, CSA
TSM600-400F-2 — 200 1,000 TSM600 UL
Part Number
Bag
Quantity
Tape & Reel
Quantity
Standard Package
Quantity Part Marking Agency Recognition
* 250V
AC
interrupt products are designed to help equipment pass ITU K.20, K.21, & K.45 recommendations and Telcordia GR-1089 Port Type 2 & 4 requirements.
† 600V
AC
interrupt products are designed to help equipment pass UL60950,TIA-968-A and GR1089 PortType 1, 3 & 5 requirements.
NEW
Table T6
Packaging and Marking Information for Telecommunications and Networking Devices
NEW
NEW
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P22

TRF250-120T-RD

Mfr. #:
Buy TRF250-120T-RD
Manufacturer:
Littelfuse
Description:
Resettable Fuses - PPTC 60V 3A 12Ohms
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet