Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
4.5 Vdc - 14 Vdc Input 0.75 Vdc - 3.63 Vdc/16 A Output
Input Specifications
Parameter Min Typ Max Notes
Input Voltage
Vo,set < 3.0 V
Vo,set ≥ 3.0 V
4.5 V
Vo,set +1.5 V
-
-
14 V
14 V
Input Current (full load) - - 15 A
Input Current (no load) - 100 mA -
Remote Off Input Current - 2 mA -
Input Reflected Ripple Current (pk-pk) - - 400 mA
Input Reflected Ripple Current (rms) - - 150 mA
Tested with one 1000 uF/25 V AL
input capacitor with ESR=0.03 ohm
max and 6 × 47 uF/16 V tantalum
capacitors with ESR=0.013 ohm
max at 100 kHz, & simulated
source impedance of 1000 nH,
5 Hz to 20 MHz.
I
2
t Inrush Current Transient - 0.2 A
2
s 0.4 A
2
s
Turn-on Voltage Threshold - 4.2 V -
Turn-off Voltage Threshold 3.7 V - 4.2 V
Output Specifications
Parameter Min Typ Max Notes
Output Voltage Set Point -2% Vo,set - 2% Vo,set Vin=12 V, full load
Load Regulation - 0.1% Vo,set - Io=Iomin to Iomax
Line Regulation - 0.1% Vo,set - Vin=Vinmin to Vinmax
Regulation Over Temperature
(-40 °C to +85 °C)
- 0.3% Vo,set - Tref=Tamin to Tamax
Output Current 0 A - 16 A
Current Limit Threshold - 180% Io -
Short Circuit Surge Transient
- 1 A
2
s 3 A
2
s
Ripple and Noise (pk-pk) - 30 mV 75 mV
Ripple and Noise (rms) - 12 mV 30 mV
Tested with 0-20 MHz, 10 uF
tantalum capacitor & 1 uF TDK
ceramic capacitor at the output
Turn on Time - 12 mS 20 mS
Overshoot at Turn on - - 1% Vo,set
Output Capacitance - - 5000 uF
Transient Response
50% ~ 100% Max Load - 150 mV -
Settling Time - 50 uS -
100% ~ 50% Max Load - 150 mV -
Settling Time
All
- 50 uS -
di/dt=2.5 A/uS; Vin=12 V; and
with 2 × 150 uF polymer
capacitors at the output
Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.