SPEC NO: DSAO4925 REV NO: V.1B DATE: AUG/25/2015 PAGE: 2 OF 6
APPROVED: Wynec CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1203015182
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Emitting Color (Material) Lens Type
Iv (mcd) [2]
@ 2mA
iewing
Angle [1]
Min. Typ. 2θ1/2
APBD3224LVBDSYKJ3C
Blue (InGaN)
Water Clear
50 100
Super Bright Yellow (AlGaInP) 50 100
20
°
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Blue
Super Bright Yellow
465
590
nm I
F=2mA
λD [1] Dominant Wavelength
Blue
Super Bright Yellow
470
590
nm I
F=2mA
Δλ1/2 Spectral Line Half-width
Blue
Super Bright Yellow
22
20
nm I
F=2mA
C Capacitance
Blue
Super Bright Yellow
100
45
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage
Blue
Super Bright Yellow
2.65
1.85
3
2.1
V IF=2mA
I
R Reverse Current
Blue
Super Bright Yellow
50
10
uA V
R = 5V
Min.
2.2
1.5
Parameter Blue Super Bright Yellow Units
Power dissipation 90 75 mW
DC Forward Current 30 30 mA
Peak Forward Current [1] 100 140 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Electrostatic Discharge Threshold (HBM) 250 3000 V
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
