SPEC NO: DSAH3713 REV NO: V.5A DATE: DEC/18/2015 PAGE: 2 OF 5
APPROVED: Wynec CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1351000568
Selection Guide
Notes:
1. Luminous intensity / luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Emitting Color (Material) Lens Type
Iv (ucd) [1]
@ 10mA
Description
Min. Typ.
Super Bright Green (GaP) White Diffused
3600 7000
Common Cathode,
Rt.Hand Decimal.
*900 *2100
ACSC08-51SGWA
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Green 565 nm I
F=10mA
λD [1] Dominant Wavelength Super Bright Green 568 nm I
F=10mA
Δλ1/2 Spectral Line Half-width Super Bright Green 30 nm I
F=10mA
C Capacitance Super Bright Green 15 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Super Bright Green 2.0 2.5 V IF=10mA
I
R Reverse Current Super Bright Green 10 uA VR=5V
Parameter Values Units
Power dissipation 62.5 mW
DC Forward Current 25 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
