MS4515DO
SENSOR SOLUTIONS
/// MS4515DO
APPLICATION NOTES
Measurement Specialties offers a comprehensive selection of product support documentation.
MS45xx Series Application Note
Bypass Capacitor Selection
Pressure Hose Recommendations
PCB Layout Recommendations
Interfacing to MEAS Digital Pressure Modules
I
2
C or SPI Protocol Description
Data Fetch, Measurement Request Commands
Timing Diagrams
Configuration, POR and Power Consumption
Standard and Low Power Configuration
Power On Reset (POR)
Current Consumption by Sampling Frequency
AVAILABLE OPTIONS
Gel Coat (-F Option)
The MS4515DO is designed for non ionic and clean dry air applications. Select this option for added protection in
high humidity or slightly corrosive environments with the application of a silicone gel elastomer to sensor and
ASIC. For questions concerning media compatibility, contact the factory.
Low Power (-L Option)
Select this option for battery powered or handheld device applications. In this configuration, the sensor and
calibration microcontroller are powered down, drawing a current of ~ 0.6uA (Vs=5.0 Vdc). When the master
sends a Read MR (measurement request) command (I
2
C or SPI); the sensor is “awaken” and begins the
measurement cycle; data is then placed onto the output registers. The sensor and calibration microcontroller are
powered down again, awaiting the Read DF (data fetch) command from the master.
