MRT100KP40A – MRT100KP400CA(e3)
Available
Unidirectional and Bidirectional Transient
Voltage Suppressor (TVS) Device
reference to
MIL-PRF-19500
These MRT100KP40A – MRT100KP400CA high reliability devices protect against dangerous
high-voltage, short term transients such as those caused the the secondary effects of lightning
per IEC61000-4-5 (see protection classes below) and RTCA/DO-160. They also protect
against voltage spikes caused by inductive load switching, induced RFI, and ESD or EFT per
IEC61000-4-2 and IEC61000-4-4. Clamping time is nearly instantaneous at < 5ns.
DO-204AR
Package
Important: For the latest information, visit our website http://www.microsemi.com.
• Available in both unidirectional and bidirectional configurations
• Suppresses transients up to 100 kW @ 6.4/69 µs
• Fast response with less than 5 ns turn-on time
• Preferred 100 kW TVS for aircraft power bus protection
• 3σ lot norm screening performed on standby current I
D
• 100% surge tested devices
• Multiple screening levels in reference to MIL-PRF-19500 are available. Refer to Hirel Non-
Hermetic Product Portfolio for more details on the screening options.
(See part nomenclature for all options.)
• High reliability controlled devices have wafer fabrication and assembly lot traceability
• Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B
• RoHS compliant versions are available
• Economical TVS series for thru-hole mounting
• Protection from high power switching transients, induced RF, and lightning threats with
comparatively small package size (0.25 inch diameter)
• Protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4
• Pin injection protection per RTCA/DO-160 up to Level 4 for Waveform 4 (6.4/69 μs) on all devices
• Pin injection protection per RTCA/DO-160 up to Level 5 for Waveform 4 (6.4/69 μs) on device types
MRT100KP33A or CA up to MRT100KP260A or CA
• Pin injection protection per RTCA/DO-160 up to Level 3 for Waveform 5A (40/120 μs) on all devices
• Pin injection protection per RTCA/DO-160 up to Level 4 for Waveform 5A (40/120 μs) on device
types MRT100KP33A or CA up to MRT100KP64A or CA
•
Consult Factory for other voltages with similar Peak Pulse Power (P
PP
) capabilities
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
RF01012, Rev. C (15/06/15) ©2015 Microsemi Corporation Page 1 of 7