16/16
Photocoupler
CNY17F series
Part No : CNY17F series
BNS-OD-FC002/A4
Rev.: C
Example : CNY17F-1STA1-V
9. NOTES
LiteOn is continually improving the quality, reliability, function or design and Lite
On reserves the right to make changes without
further notices.
The products shown in this publication are designed for the general use in electronic
applications such as office automation
equipment, communications devices, audio/visual equipment, electrical application and instrumentation.
For equipment/devices where high reliability or safety is required, such as space applications, nucl
ear power control equipment,
medical equipment, etc, please contact our sales representatives.
When requiring a device for any “specific” application, please contact our sales in advice.
If there are any questions about the contents of this publication, please contact us at your convenience.
The contents described herein are subject to change without prior notice.
Immerge unit’s body in solder paste is not recommended.
(2) TAPING TYPE (TA, TA1 or none)
Please refer to orientation of taping on Page P5
(1) No suffix = Dual-in-Line package
M = Wide lead spacing package
S = Surface mounting package
(3) VDE Option
CNY17F-X(1)(2)-V
DEVICE PART NUMBER
Classified by CTR RANK
Please refer to the CTR table on Page P7
