https://www.phoenixcontact.com/us/products/1690066
2/4/14Page2/5
EMC housing-HC-B 10-TMS-100/O1STM25S-EMV-1690066
Technical data
General
Note For contact inserts HC-B10, BB18, DD42, M, K8/24
Design B10
Housing type Sleeve housings
Locking type Screw locking
Torque 3 Nm (Locking screw)
Fixing screws M6
Cable exit Lateral
Type of the screw connection 1x M25
Housing material Aluminum die-cast
Housing surface material EMC coating, silver
Seal material NBR, conductive
Material lock High-grade steel
Assembly instructions
In order to guarantee that the ground conductor contact functions even
when plugged in at an angle, the two panel mounting flanges must have
sufficient electrical contact with the metal mounting panel.
Connection
To ensure optimum shielding, any insulating power coating must be
removed from the profile gasket area on the control cabinet panel.
Tightening torque of locking screw: 3Nm.
Classifications
eCl@ss
eCl@ss 4.0 27140816
eCl@ss 4.1 27140816
eCl@ss 5.0 27371205
eCl@ss 5.1 27371205
eCl@ss 6.0 27371205
eCl@ss 7.0 27371205
eCl@ss 8.0 27371205
ETIM
ETIM 2.0 EC000437
ETIM 3.0 EC000437
ETIM 4.0 EC000437
ETIM 5.0 EC000437
UNSPSC
UNSPSC 6.01 31261502
UNSPSC 7.0901 31261502