© 2016 Littelfuse Protection Relays & Controls
Time Delay Relays
On-Delay Timers
www.littelfuse.com/
Rev: 1-A-062116
www.littelfuse.com/t10
T10 SERIES
Solid-State On-Delay Timer
Description
The T10 Series on-delay timer is a solid-state electronic device
that provides accurate and reliable timing for control circuits up
to 460VAC. The T10 features a user-selectable time delay from
6 seconds to 10 minutes (0.5 to 12 seconds on the T10S400
model) and SPDT output contacts. When power is applied to the
T10, it immediately begins its timing cycle. During this time, the
indicator LED alternates between red and green and the output
contacts remain inactive. When the timing cycle is complete,
the indicator LED turns solid green and the output contacts are
activated. The output contacts will remain activated until power
is removed from the T10.
The SPDT contact ratings are 480V @ 240VAC on the 115V and
230V models, and 470VA @ 600VAC on the 460V model.
Features & Benefits
J
Status LED
J
600V control relay on 460V models
Specifications
Input Characteristics
Frequency 50*/60Hz
Functional Characteristics
Timing Range
T10100, T10200, T10400 6 seconds to 10 minutes
T10S400 0.5 seconds to 12 seconds
Repeat Accuracy
Fixed Condition ±1%
Output Characteristics
Output Contact Rating (SPDT)
Pilot Duty
T10100, T10200 480VA @ 240VAC
T10400, T10S400 470VA @ 600VAC
General Characteristics
Maximum Input Power 5 W
Terminal
Torque 7 in.-lbs.
Wire Size 12-18AWG
Safety Marks
UL UL508 (File #E68520)
Dimensions H 74.4 mm (2.93”); W 133.9 mm (5.27”);
D 74.9 mm (2.95”)
Weight 0.94 lb. (15.04 oz., 426.38 g)
Mounting Method #8 screws
*Note: 50Hz will increase all delay timers by 20%.
Wiring Diagram
Ordering Information
MODEL LINE VOLTAGE DESCRIPTION
T10120 115VAC
0.1 to 10 minute range, 240 VAC
rated output contacts
T10200 230VAC
0.1 to 10 minute range, 240 VAC
rated output contacts
T10400 460VAC
0.1 to 10 minute range, 600 VAC
rated output contacts
T10S400 460VAC
0.5 to 12 second range, 600 VAC
rated output contacts
