Dimension table in next page.
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Specifications
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Endurance
Shelf Life
Marking
Performance CharacteristicsItem
–40 to +105°C (10 to 50V), –25 to +105°C (160 to 450V)
10 to 450V
0.47 to 3300µF
±20% at 120Hz, 20°C
Rated Voltage (V) 10 to 50V 160 to 450V
———
After 2 minutes' application of rated
voltage, leakage current is not more than
0.01CV or 3 (µA) , whichever is greater.
After 2 minutes' application of rated
voltage, leakage current is not more than
0.06CV+10 (µA) .
Printed with white color letter on dark brown sleeve.
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Measurement frequency : 120Hz
Capacitance change
Leakage current
The specifications listed at right shall be met when the
capacitors are restored to 20
°C
after D.C. bias plus
rated ripple current is applied for 5000 hours (7000
hours for φD=10 and 12.5 (10 to 50V)) at 105
°C
, the
peak voltage shall not exceed the rated voltage.
tan δ
Within ±30% of the initial capacitance value (10 to 50V)
Within ±20% of the initial capacitance value (160 to 450V)
Less than or equal to the initial specified value
300% or less than the initial specified value (10 to 50V)
200% or less than the initial specified value (160 to 450V)
Z–25°C / Z+20°C
Rated voltage (V)
Impedance ratio ZT / Z20 (MAX.)
10
3
16
2
25
2
35
2
50
2
160
3
200
3
250
3
350
4
400
6
450
6
Measurement frequency : 120Hz at 20°C
Rated voltage (V)
tan δ (MAX.)
10
0.30
16
0.25
25
0.22
50
0.15
160
0.15
200
0.15
250
0.15
350
0.20
400
0.24
450
0.24
35
0.18
PB
CA
Long Life
PT
Smaller
• Please refer to page 20 about the end seal configulation.
Products which are scheduled to be discontinued.
Not recommended for new designs
CAT.8100B
