MSP5.0A
Vishay General Semiconductor
Document Number: 88487
Revision: 16-Jun-09
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com
, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
New Product
Surface Mount TRANSZORB
®
Transient Voltage Suppressors
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
specifically for protecting 5.0 V supplied sensitive
equipment against transient overvoltages.
FEATURES
• Very low profile - typical height of 0.65 mm
• Ideal for automated placement
• Oxide planar chip junction
• Uni-directional polarity only
• Peak pulse power: 100 W (10/1000 µs)
• ESD capability: 15 kV (air), 8 kV (contact)
• Meets MSL level 1, per J-STD-020C, LF maximum
peak of 260 °C
• Solder dip 265 °C max. 10 s, per JESD 22-A111
• AEC-Q101 qualified
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Halogen-free according to IEC 61249-2-21
definition
• Find out more about Vishay’s Automotive Grade
Product requirements at:
www.vishay.com/applications
MECHANICAL DATA
Case: MicroSMP
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-M3 - halogen-free and RoHS compliant,
commercial grade
Base P/NHM3 - halogen-free and RoHS compliant,
automotive grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3
suffix meets JESD 201 class 2 whisker test
Polarity: Color band denotes the cathode end
Notes
(1)
Non-repetitive current pulse, per fig. 1
(2)
Mounted on 6.0 mm x 6.0 mm copper pads to each terminal
PRIMARY CHARACTERISTICS
V
WM
5.0 V
P
PPM
100 W
I
FSM
25 A
T
J
max. 150 °C
Top View
Bottom View
MicroSMP
eSMP
TM
Series
MAXIMUM RATINGS (T
A
= 25 °C unless otherwise noted)
PARAMETER SYMBOL VALUE UNIT
Peak pulse power dissipation
(1)(2)
P
PPM
100 W
Peak pulse current with a 10/1000 µs waveform (fig. 1) I
PPM
10.9 A
Non repetitive peak forward surge current 10 ms single half sine-wave
(2)
I
FSM
25 A
Power dissipation T
L
= 120 °C
(2)
P
D
1.0 W
Operating junction and storage temperature range T
J
, T
STG
- 55 to + 150 °C