AT49F040
7
AC Byte Load Waveforms
WE Controlled
CE
Controlled
AC Byte Load Characteristics
Symbol Parameter Min Max Units
t
AH
Address Hold Time 50 ns
t
CS
Chip Select Set-up Time 0 ns
t
CH
Chip Select Hold Time 0 ns
t
WP
Write Pulse Width (WE or CE)90ns
t
DS
Data Set-up Time 50 ns
t
DH
, t
OEH
Data, OE Hold Time 0 ns
t
WPH
Write Pulse Width High 90 ns
AT49F040
8
Program Cycle Waveforms
Chip Erase Cycle Waveforms
Note: OE must be high only when WE and CE are both low.
Program Cycle Characteristics
Symbol Parameter Min Typ Max Units
t
BP
Byte Programming Time 10 50 µs
t
AS
Address Setup Time 0 ns
t
AH
Address Hold Time 50 ns
t
DS
Data Setup Time 50 ns
t
DH
Data Hold Time 0 ns
t
WP
Write Pulse Width 90 ns
t
WPH
Write Pulse Width High 90 ns
t
EC
Erase Cycle Time 10 seconds
AT49F040
9
Notes: 1. These parameters are characterized and not 100% tested.
2. See t
OE
spec in AC Read Characteristics.
Data Polling Waveforms
Notes: 1. These parameters are characterized and not 100% tested.
2. See t
OE
spec in AC Read Characteristics.
Toggle Bit Waveforms
(1)(2)(3)
Notes: 1. Toggling either OE or CE or both OE and CE will operate toggle bit. The t
OEHP
specification must be met by the toggling
input(s).
2. Beginning and ending state of I/O6 will vary.
3. Any address location may be used but the address should not vary.
Data Polling Characteristics
(1)
Symbol Parameter Min Typ Max Units
t
DH
Data Hold Time 10 ns
t
OEH
OE Hold Time 10 ns
t
OE
OE to Output Delay
(2)
ns
t
WR
Write Recovery Time 0 ns
Toggle Bit Characteristics
(1)
Symbol Parameter Min Typ Max Units
t
DH
Data Hold Time 10 ns
t
OEH
OE Hold Time 10 ns
t
OE
OE to Output Delay
(2)
ns
t
OEHP
OE High Pulse 150 ns
t
WR
Write Recovery Time 0 ns

AT49F040-90JI

Mfr. #:
Manufacturer:
Description:
IC FLASH 4M PARALLEL 32PLCC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union