xPico Wi-Fi SMT
Embedded Wireless
Device Server
Americas
800.422.7055
sales@lantronix.com
http://www.lantronix.com
NASDAQ: LTRX
Europe
+31 (0) 76.52.3.6.74 4
EMEA@lantronix.com
Asia/Pacic/Japan
+852 3428.2338
asiapacic_sales@lantronix.com
China: +86.21.6237.8868
Shanghai@lantronix.com
India: +91 994-551-2488
Sales_India@lantronix.com
Japan: +81.3.3273.8850
Sales_Japan@lantronix.com
Ordering Information
Part Number Description
XPCW1002100B
xPico Wi-Fi W1002— IEEE 802.11 b/g/n
Device Server Module, Extended Temp, SMT,
Bulk, RoHS
XPCW1003100B
xPico Wi-Fi W1003— IEEE 802.11 b/g/n
Device Server Module, Extended Temp, w/
On-Module Antenna SMT, Bulk, RoHS
XPCW1003100S
xPico Wi-Fi W1003— IEEE 802.11 b/g/n
Device Server Module, Extended Temp, SMT,
Sample, RoHS
XPCW1002100K
EVALUATION KIT with xPico Wi-Fi W1002 Wi-
Fi Module, SMT on Carrier Board, IEEE 802.11
b/g/n, with U.FL and Antenna Sample
XPCW1003100K
EVALUATION KIT with xPico Wi-Fi W1003
Wi-Fi Module, SMT 802.11 b/g/n, On-Module
Antenna
©2016 Lantronix, Inc. All rights reserved. Lantronix and xPico are registered trademarks of Lantronix, Inc. in the U.S. and certain other countries. Wi-Fi is a registered trademark of Wi-Fi Alliance. All other
trademarks and trade names are the property of their respective owners. MPB-00018 Rev B
Features and Specications
Wireless LAN Interface
• IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface
(2.4 GHz only)
• IEEE 802.11 d/h/i/j/k/w/r
• u.FL connector and RF pads for optional external atenna
(XPCW1002100B)
Serial Interface
• Two Serial CMOS Ports (3.3V, 5V tolerant)
• 300 to 921.6 Kbps
• Flow control XON/XOFF, RTS/CTS
• Lantronix tunneling application
Host Interface
• Dual Serial Port, SPI, USB 2.0* (device)
• 8 GPIO
Network Protocols
• TCP/IP, UDP/IP*, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS
Networking Capabilities
• Soft Access Point with DHCP Server
• QuickConnect: Dynamic Proles facilitate easy and rapid
connections to access points
Management and Control
• Web Server - Landing Page
• CLI (Serial Monitor Port)
• XML import and Export (XCR)
• Field upgradable rmware (OTA)
Security
• IEEE 802.11i Support – WPA-Personal, WPA2-Personal
• 256-bit AES Encryption*
Architecture
• ARM Cortex M3 class processor with on-chip Flash and SRAM
• 1MB Flash and 128 KB SRAM
• 1MB SPI Flash storage
Power
• Input Voltage: 3.3VDC
• Low power consumption of approximately 6μA standby
Physical Interface
• 56-Pad SMT Castellation
Environmental
• Operating Temperature: –40° to +85° C
• Storage Temperature : –40° to +85° C
• Relative Humidity: 0% to 90% non-condensing
Certications
• FCC Class B, UL and EN EMC
Packaging
• Dimensions:
- XPCW1002100: 26.1mm (L) x 18.3mm (W) x 3.0mm (H)
- XPCW1003100: 30.1mm (L) x 18.3mm (W) x 3.0mm (H)
• Weight: 2.5g
Warranty
• 5-Year Limited
Tablet & Smartphone enable devices
xPico WiFi SMT provides simultaneous Soft AP and Client mode, allowing for easy
points of access while maintaining a secure network without the need for special
clients.
Other members of the xPico product family:
xPico
A chip-sized networking solution that
enables Ethernet connectivity on
virtually any device.
xPico IAP
A chip-sized networking solution that
enables Ethernet connectivity on devices
for industrial and automation applications
that require MODBUS support.
*Software support for these features available in a future software release.
Please contact sales representatives for more information.