CRCW-HP e3
www.vishay.com
Vishay Draloric
Revision: 21-Mar-13
1
Document Number: 20043
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Pulse Proof, High Power Thick Film Chip Resistors
FEATURES
• Excellent pulse load capability
• Enhanced power rating
• Double side printed resistor element
• Protective overglaze
• Pure tin solder contacts on Ni barrier layer
provides compatibility with lead (Pb)-free and
lead containing soldering processes
• AEC-Q200 qualified, rev. C compliant
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
• Marking: See document “Surface Mount Resistor Marking” (document number 20020).
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
(1)
CRCW0402-HP resistors feature a single side printed resistive layer only.
Note
(2)
The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
CASE
SIZE
INCH
CASE
SIZE
METRIC
POWER RATING
P
70
W
LIMITING
ELEMENT
VOLTAGE
U
max.
AC/DC
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE
SERIES
CRCW0402-HP e3 0402 RR1005
0.125
(1)
50
± 100 ± 0.5, ± 1
1 to 1M
E24; E96
± 200 ± 5 E24
Zero-Ohm-Resistor: R
max
. = 0.010 , I
max.
= 3 A
CRCW0603-HP e3 0603 RR1608
0.25 75
± 100 ± 0.5, ± 1
1 to 1M
E24; E96
± 200 ± 5 E24
Zero-Ohm-Resistor: R
max
. = 0.008 , I
max.
= 5 A
CRCW0805-HP e3 0805 RR2012
0.33 150
± 100 ± 0.5, ± 1
1 to 1M
E24; E96
± 200 ± 5 E24
Zero-Ohm-Resistor: R
max
. = 0.005 , I
max.
= 6 A
CRCW1206-HP e3 1206 RR3216
0.5 200
± 100 ± 0.5, ± 1
1 to 1M
E24; E96
± 200 ± 5 E24
Zero-Ohm-Resistor: R
max
. = 0.005 , I
max.
= 10 A
CRCW1210-HP e3 1210 RR3225
0.75 200
± 100 ± 0.5, ± 1
1 to 1M
E24; E96
± 200 ± 5 E24
Zero-Ohm-Resistor: R
max
. = 0.004 , I
max.
= 12 A
CRCW1218-HP e3 1218 RR3246
1.5 200
± 100 ± 0.5, ± 1
1 to 1M
E24; E96
± 200 ± 5 E24
Zero-Ohm-Resistor: R
max
. = 0.004 , I
max.
= 20 A
CRCW2010-HP e3 2010 RR5025
1.0 400
± 100 ± 0.5, ± 1
1 to 1M
E24; E96
± 200 ± 5 E24
Zero-Ohm-Resistor: R
max
. = 0.005 , I
max.
= 12 A
CRCW2512-HP e3 2512 RR6332
1.5 500
± 100 ± 0.5, ± 1
1 to 1M
E24; E96
± 200 ± 5 E24
Zero-Ohm-Resistor: R
max
. = 0.005 , I
max.
= 16 A
TECHNICAL SPECIFICATIONS
PARAMETER UNIT
CRCW
0402-HP
CRCW
0603-HP
CRCW
0805-HP
CRCW
1206-HP
CRCW
1210-HP
CRCW
1218-HP
CRCW
2010-HP
CRCW
2512-HP
Rated dissipation P
70
(2)
W 0.125 0.25 0.33 0.5 0.75 1.5 1.0 1.5
Limiting element voltage U
max.
AC/DC V 50 75 150 200 200 200 400 500
Insulation voltage U
ins.
(1 min) V > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300
Insulation resistance > 10
9
Category temperature range °C - 55 to + 155
Weight mg 0.65 2 5.5 10 18 31 25.5 42
