OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PEL12D-2225S-S1024

P1-P3P4-P4
How To Order
PEL12D - 4 0 21 F - S 1 024
Model
Terminal Confi guration
2 = Vertical Mount/Side Exit PC Pin 4 = Horizontal Mount/Rear Exit PC Pin
Detent Option
0 = No Detents 2 = 24 Detents
Standard Shaft Length
Flatted: Knurled:
16 = 16.0 mm 26 = 26.0 mm 25 = 25.0 mm
18 = 18.5 mm 31 = 31.0 mm
21 = 21.0 mm
Shaft Style
F = Insulated Flatted Shaft S = Insulated Knurled Shaft (18 Teeth)
G = Insulated Flatted Shaft w/Bushing*** T = Insulated Knurled Shaft (18 Teeth) w/Bushing
Switch Confi guration
S = Push Momentary Switch
LED Color
Dual:
1 = Blue/Orange
2 = Green/Red
3 = Blue/Green
Resolution
024 = 24 Pulses per 360 ° Rotation
*** Available in 18.5, 21 and 26 mm shaft lengths
Features
■ Compact design, long life and high
reliability
■ Vertical and horizontal mount versions
■ Momentary switch
■ Dual LED design
■ Flatted and knurled shaft styles
■ Bushing and bushingless options
PEL12D - 12 mm Encoder with Switch and Illuminated Shaft
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
**Devices are tested using standard noise reduction fi lters. For optimum performance, designers should use noise reduction fi lters in their circuits.
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
Electrical Characteristics
Output .....................................................................................................................................................................................2-bit quadrature code
Closed Circuit Resistance ........................................................................................................................................................... 3 ohms maximum
Contact Rating .............................................................................................................................................................................. 0.5 mA @ 5 VDC
Insulation Resistance ....................................................................................................................................................100 megohms @ 250 VDC
Dielectric Withstanding Voltage
Sea Level ................................................................................................................................................................................ 300 VAC minimum
Electrical Travel ......................................................................................................................................................................................Continuous
Contact Bounce (15 RPM).........................................................................................................................................................2.0 ms. maximum**
RPM (Operating) ............................................................................................................................................................................ 100 maximum**
Environmental Characteristics
Operating Temperature Range .......................................................................................................................-10 °C to +70 °C (+14 °F to +158 °F)
Storage Temperature Range .......................................................................................................................... -40 °C to +85 °C (-40 °F to +185 °F)
Operating Humidity ..................................................................................................................................................................... 25 % to 85 % R.H.
Rotational Life..................................................................................................................................................................... 30,000 cycles minimum
Switch Life .......................................................................................................................................................................... 20,000 cycles minimum
IP Rating ...........................................................................................................................................................................................................IP 40
Mechanical Characteristics
Mechanical Angle ..........................................................................................................................................................................360 ° continuous
Detent Torque ..................................................................................................................................................30 to 200 g-cm (0.42 to 2.77 oz.-in.)
Running Torque ..................................................................................................................................................... 50 g-cm (0.69 oz.-in.) maximum
Shaft Strength (Push) ...................................................................................................................................................................... 5 kgf (11.0 lbs.)
Shaft Strength (Pull) ...................................................................................................................................................................... 10 kgf (22.0 lbs.)
Weight ............................................................................................................................................................................... 3 gm (0.1 oz.) maximum
Terminals .................................................................................................................................................................. Printed circuit board terminals
Soldering Condition
Wave Soldering ..................................................................... Sn95.5/Ag2.8/Cu0.7 solder with no-clean fl ux: 260 °C max. for 5 ± 1 seconds
Hand Soldering .................................................................................................................................................................. Not recommended
Hardware ................................................................................... One fl at washer and one mounting nut supplied with each encoder with bushing
Switch Characteristics
Switch Type .....................................................................................................................................................Contact Push ON Momentary SPST
Power Rating (Resistive Load) ...................................................................................................................................................... 10 mA at 5 V DC
Contact Resistance ............................................................................................................................................................................100 milliohms
Switch Travel .................................................................................................................................................................................0.5 +0.0/-0.3 mm
Switch Actuation Force .................................................................................................................................................450 ± 200 gf (15.9 ±7.0 oz.)
*RoHS COMPLIANT
0.8
(.031)
4 PLCS.
PEL12D-4xxxS-Sxxxx (Horizontal Mount w/Dual LED & Switch, Knurled Shaft)
18.0
(.709)
25.0
(.984)
7.0
(.276)
2.0 ± 0.1
(.079 ± .004)
2.8
(.110)
DIA.
6.8
(.268)
MOUNTING
SURFACE
0.8
(.031)
0.3
(.012)
0.3
(.012)
6.0
(.236)
DIA.
SWITCH
STROKE
18 TEETH
5.0
(.197)
7.0
(.276)
2.9
(.114)
0.5 +0/-0.3
(.020 +0/-.012)
A
4 3 2 1
C
B
5.0
(.197)
8.2
(.323)
12.4
(.488)
14.0
(.551)
10.2
(.402)
13.2
(.520)
DIA. 3 PLCS.
1.1 +0.2/-0
(.043 +.008/-0)
DIA. 4 PLCS.
1.0 +0.2/-0
(.039 +.008/-0)
13.2 ± 0.1
(.520 ± .004)
2.1 +0.1/-0
(.083 +.004/-0)
2 PLCS.
2.0 +0.1/-0
(.079 +.004/-0)
2 PLCS.
7.5 ± 0.1
(.295 ± .004)
7.0 ± 0.1
(.276 ± .004)
6.0 ± 0.1
(.236 ± .004)
2.0 ± 0.1
(.079 ± .004)
5.0 ± 0.1
(.197 ± .004)
A
C
B
PEL12D-4xxxF-Sxxxx (Horizontal Mount w/Dual LED & Switch, Flatted Shaft)
7.0
(.276)
2.0 ± 0.1
(.079 ± .004)
2.8
(.110)
DIA.
6.8
(.268)
MOUNTING
SURFACE
0.8
(.031)
0.3
(.012)
0.3
(.012)
5.0
(.197)
2.9
(.114)
A
C
B
5.0
(.197)
8.2
(.323)
12.4
(.488)
14.0
(.551)
10.2
(.402)
13.2
(.520)
L1
LM
0.5
(.020)
4.5 ± 0.05
(.177 ± .002)
6.0 ± 0.1
(.236 ± .004)
DIA.
1.5
(.591)
SWITCH
STROKE
0.5 +0/-0.3
(.020 +0/-.012)
PEL12D - 12 mm Encoder with Switch and Illuminated Shaft
Product Dimensions
DIMENSIONS:
MM
(INCHES)
L1 LM
3
(.118)
16
(.630)
5
(.197)
18.5
(.728)
7
(.276)
21
(.827)
12
(.472)
26
(1.024)
12
(.472)
31
(1.220)
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
4
3
2
1
(+)
(+)
(-)
Dual LED Circuit
UNDER
=
10.0
(.394)
TOLERANCES:
±0.3
(±.012)
=
10.0 ~ 100
(.394 ~ 3.937)
±0.5
(±.020)
Applications
Level control, tuning and timer settings in:
■ Audio-visual equipment
■ Consumer electric appliances
■ Musical instrumentation
■ Communications equipment
PEL12D - 12 mm Encoder with Switch and Illuminated Shaft
Product Dimensions
0.8
(.031)
4 PLCS.
PEL12D-2xxxS-Sxxxx (Vertical Mount w/Dual LED & Switch, Knurled Shaft)
A
C
B
10.0
(.394)
8.2
(.315)
12.4
(.488)
10.2
(.402)
13.2
(.520)
4
3
2
1
18.0
(.709)
25.0
(.984)
7.0
(.276)
DIA.
6.8
(.268)
MOUNTING
SURFACE
0.8
(.031)
6.0
(.236)
DIA.
SWITCH
STROKE
18 TEETH
5.0
(.197)
7.0
(.276)
0.5 +0/-0.3
(.020 +0/-.012)
2.0
(.079)
2.5
(.098)
10.0
(.394)
6.1
(.240)
3.5
(.138)
DIA. 3 PLCS.
1.1 +0.2/-0
(.043 +.008/-0)
DIA. 4 PLCS.
1.0 +0.2/-0
(.039 +.008/-0)
2.1 +0.1/-0
(.083 +.004/-0)
2 PLCS.
2.0 +0.1/-0
(.079 +.004/-0)
2 PLCS.
2.0 +0.1/-0
(.079 +.004/-0)
2 PLCS.
10.8 ± 0.1
(.425 ± .004)
3.1 ± 0.1
(.122 ± .004)
5.0 ± 0.1
(.197 ± .004)
A
C
B
4.5 ± 0.1
(.177 ± .004)
2.0 ± 0.1
(.079 ± .004)
6.0 ± 0.1
(.236 ± .004)
PEL12D-2xxxF-Sxxxx (Vertical Mount w/Dual LED & Switch, Flatted Shaft)
A
C
B
10.0
(.394)
8.2
(.315)
12.4
(.488)
10.2
(.402)
13.2
(.520)
7.0
(.276)
DIA.
6.8
(.268)
MOUNTING
SURFACE
0.8
(.031)
5.0
(.197)
2.0
(.079)
2.5
(.098)
10.0
(.394)
6.1
(.240)
3.5
(.138)
L1
LM
0.5
(.020)
4.5 ± 0.05
(.177 ± .002)
6.0 ± 0.1
(.236 ± .004)
DIA.
1.5
(.591)
SWITCH
STROKE
0.5 +0/-0.3
(.020 +0/-.012)
L1 LM
3
(.118)
16
(.630)
5
(.197)
18.5
(.728)
7
(.276)
21
(.827)
12
(.472)
26
(1.024)
12
(.472)
31
(1.220)
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
DIMENSIONS:
MM
(INCHES)
UNDER
=
10.0
(.394)
TOLERANCES:
±0.3
(±.012)
=
10.0 ~ 100
(.394 ~ 3.937)
±0.5
(±.020)
P1-P3P4-P4

PEL12D-2225S-S1024

Mfr. #:
Buy PEL12D-2225S-S1024
Manufacturer:
Bourns
Description:
Encoders 2pin Blue/Orange Knurled w/switch
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet