Pomona
®
Made in USA
dips.doc PomonaACCESS 90220 (800) 444-6785 or (714) 253-3858
REV A More drawings available at www.ittpomona.com
DIP CLIPS
8 through 40 pins and
8 through 40 pin DIP Removers
Sales: 909-469-2900 Fax: 909-629-3317
Technical Assistance: 800-241-2060
ITT Pomona DIP Clip® test clips are designed for
testing dual-in-line IC packages on PC boards. These
devices incorporate many built-in features that assure a
positive electrical connection as well as hands free
testing.
n Contacts (.040" wide on lower end) are serrated for
the best electrical contact.
n .025" X .028" serrated test points on upper end will
accept wire wraps or mini test clips.
n Molded barriers between contacts allows live board
connections without accidental shorting of contacts.
n Can also be used as an insertion tool for DIPs.
n Contacts are spring tempered Nickel Silver or Gold Plated Beryllium Copper alloy. Oxide penetrating clips have a roughened stainless
steel surface treatment.
n Open back option allows probing on the chip leads while clip is attached.
Pomona's DIP Clip® test clips are perfect for emulation, field service, failure analysis, and for use with logic analyzers.
Size Pins Clip Width
Standard
DIP Clip®
Open Back DIP
Clip®
Contact Material and
Plating
Oxide Penetrating
DIP Clip®
Static Control DIP
Remover
8 .43
5108 5208
Be-Cu, Gold Plate
5649 5016
5014 5114
Nickel Silver
5650 5016
14 .72
5214 5314
Be-Cu, Gold Plate
5650 5016
3916A 4236A
Nickel Silver
5692 5016
16 .83
5116 5216
Be-Cu, Gold Plate
5692 5016
20 1.03
5120 5220
Be-Cu, Gold Plate
5693 5016
4124A 4324A
Nickel Silver
5694 5024
24 1.22
5124 5224
Be-Cu, Gold Plate
5694 5024
4140A 4340A
Nickel Silver
5695 5040
40 2.02
5140 5240
Be-Cu, Gold Plate
5695 5040
