TLP4026G
2014-09-01
2
Absolute Maximum Ratings
(Ta
=
25°C)
Characteristics Symbol Rating Unit
LED
Forward current I
F
50 mA
Forward current derating (Ta ≥ 25°C) ΔI
F
/°C −0.5 mA/°C
Peak forward current I
FP
1 A
Reverse voltage V
R
5 V
Junction temperature T
j
125 °C
Detector
Off-state output terminal voltage V
OFF
350 V
On-state current
One channel operation
I
ON
120 mA
Two channel operations
(1a1b simultaneous operation)
On-state current derating
(Ta ≥ 25°C)
One channel operation
ΔI
ON
/°C −1.2 mA/°C
Two channel operations
(1a1b simultaneous operation)
Junction temperature T
j
125 °C
Storage temperature range T
stg
−55 to 125 °C
Operating temperature range T
opr
−40 to 85 °C
Lead soldering temperature (10 s) T
sol
260 °C
Isolation voltage (AC, 1 minute, R.H. < 60%) (Note 1) BV
S
1500 Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Pins 1, 2, 3 and 4 are shorted together, and pins 5, 6, 7 and 8 are shorted together.
Recommended Operating Conditions
Characteristics Symbol Min Typ. Max Unit
Supply voltage V
DD
⎯ ⎯ 280 V
Forward current I
F
5 ⎯ 25 mA
On-state current I
ON
⎯ ⎯ 120 mA
Operating temperature T
opr
−20 ⎯ 65 °C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Electrical Characteristics
(Ta
=
25°C)
Characteristics Symbol Test Condition Min Typ. Max Unit
LED
Forward voltage V
F
I
F
= 10 mA 1.0 1.15 1.3 V
Reverse current I
R
V
R
= 5 V ⎯ ⎯ 10 μA
Capacitance C
T
V = 0, f = 1 MHz ⎯ 30 ⎯ pF
Detector
Off-state current I
OFF
V
OFF
= 350 V ⎯ ⎯ 1 μA
Capacitance (1b)
C
OFF
V = 0, f = 1 MHz, I
F
= 5 mA
⎯ 65 ⎯ pF
Capacitance (1a) V = 0, f = 1 MHz