Data Sheet ADV7403
Parameter Symbol Test Conditions/Comments Min Typ Max Unit
Analog Supply Current
8
I
AVDD
CVBS input sampling at 54 MHz 99 mA
Graphics RGB sampling at 135 MHz 242 mA
SCART RGB FB sampling at 54 MHz 269 mA
Power-Down Current I
PWRDN
2.25 mA
PWRDNG
Power-Up Time T
PWRUP
20 ms
1
All ADC linearity tests performed at input range of full scale − 12.5% and at zero scale + 12.5%.
2
Maximum INL and DNL specifications obtained with device configured for component video input.
3
This specification is for the ADV7403KSTZ-140 only.
4
To obtain specified V
IH
level on the XTAL pin (Pin 38), program Subaddress 0x13 (write only) with 0x04 value. When Subaddress 0x13 is set to 0x00 value, V
IH
level on
the XTAL pin = 1.2 V.
5
To obtain specified V
IL
level on the XTAL pin (Pin 38), program Subaddress 0x13 (write only) with 0x04 value. When Subaddress 0x13 is set to 0x00 value, V
IL
level on
the XTAL pin (Pin 38) = 0.4 V.
6
Guaranteed by characterization.
7
V
OH
and V
OL
levels obtained using default drive strength value (0xD5) in Subaddress 0xF4.
8
Analog current measurements for CVBS made with only ADC0 are powered up; for RGB, only ADC0, ADC1, and ADC2 are powered up; and for SCART FB, all ADCs
powered up.
VIDEO SPECIFICATIONS
AVDD = 3.15 V to 3.45 V, DVDD = 1.65 V to 2.0 V, DVDDIO = 3.0 V to 3.6 V, PVDD = 1.71 V to 1.89 V. Operating temperature range,
unless otherwise noted is T
MIN
to T
MAX
: −40°C to +85°C (0°C to 70°C temperature range for ADV7403KSTZ-140). Guaranteed by
characterization.
Table 2.
Parameter Symbol Test Conditions/Comments Min Typ Max Unit
NONLINEAR SPECIFICATIONS
Differential Phase DP CVBS input, modulated 5 step 0.4 Degrees
Differential Gain DG CVBS input, modulated 5 step 0.4 %
Luma Nonlinearity LNL CVBS input, 5 step 0.4 %
NOISE SPECIFICATIONS
SNR Unweighted Luma ramp 61 64 dB
Luma flat field 64 65 dB
Analog Front End Crosstalk 60 dB
LOCK TIME SPECIFICATIONS
Horizontal Lock Range −5 +5 %
Vertical Lock Range 40 70 Hz
f
SC
Subcarrier Lock Range ±1.3 kHz
Color Lock in Time 60 Lines
Sync Depth Range
1
20 200 %
Color Burst Range 5 200 %
Horizontal Lock Time 100 Lines
Hue Accuracy HUE 1 Degrees
Color Saturation Accuracy CL_AC 1 %
Color AGC Range 5 400 %
Chroma Amplitude Error 0.4 %
Chroma Phase Error 0.3 Degrees
Chroma Luma Intermodulation 0.1 %
LUMA SPECIFICATIONS
Luma Accuracy
Brightness CVBS, 1 V input 1 %
Contrast CVBS, 1 V input 1 %
1
Nominal sync depth is 300 mV at 100% sync depth range.
Rev. B | Page 5 of 20