4
Precision Edge
®
SY100HA643Micrel, Inc.
M9999-032906
hbwhelp@micrel.com or (408) 955-1690
AC CHARACTERISTICS
IVT = OVT = 5.0V ±5%; VEE = –4.2V to –5.5V ; VCCE = GND
T
A = –40°CTA = 0°CTA = +25°CTA = +85°C
Symbol Parameter Min. Max. Min. Max. Min. Max. Min. Max. Unit Condition
I
IH Propagation Delay D
to Output LEN 2.3 3.1 2.3 3.1 2.3 3.1 2.3 3.1 ns C
L = 20pF
EN
tskew Within-Device Skew
(1)
— 0.4 — 0.4 — 0.4 — 0.4 ns
t
PW Pulse Width Out
(2)
HIGH or LOW 4.5 5.5 4.5 5.5 4.5 5.5 4.5 5.5 ns CL = 20pF
@ FOUT = 100MHz
tS Setup Time D 0.75 — 0.75 — 0.75 — 0.75 — ns
tH Hold Time D 0.75 — 0.75 — 0.75 — 0.75 — ns
t
RR Recovery TimeLEN 1.25 — 1.25 — 1.25 — 1.25 — ns
EN 1.25 — 1.25 — 1.25 — 1.25 — ns
t
PW Minimum PulseLEN 1.5 — 1.5 — 1.5 — 1.5 — ns
Width EN 1.5 — 1.5 — 1.5 — 1.5 — ns
tr Rise / Fall times
tf 0.8V — 2.0V — 1.5 — 1.5 — 1.5 — 1.5 ns CL = 20pF
f
MAX Max. Input Frequency
(3,4)
160 — 160 — 160 — 160 — MHz CL = 20pF
Notes:
1. Within-Device skew defined as identical transitions on similar paths through a device.
2. Pulse width is defined relative to 1.5V measurement points on the output waveform.
3. Frequency at which output levels will meet a 0.8V to 2.0V minimum swing.
4. The f
MAX value is specified as the minimum guaranteed maximum frequency. Actual operational maximum frequency may be greater.
