725-32905 Datasheet 725-32905 | P1-P3

Web Site: www.parallax.com

Forums: forums.parallax.com

Sales: sales@parallax.com

Technical: support@parallax.com

Office: (916) 624-8333

Fax: (916) 624-8003

Sales: (888) 512-1024

Tech Support: (888) 997-8267

ActivityBot Speaker Mount (#725-32905)

This kit provides a convenient means to mount a veho360 speaker to the ActivityBot robot's chassis,

conveniently near the Activity Board's audio jack. Along with a veho360 speaker (sold separately) it's a

key accessory to equip your robot to play tunes, make sound effects, or report sensor data from audio

files stored on its microSD card.

ActivityBot Speaker Mount Kit Parts Kit and veho360 speaker on an ActivityBot

Bill of Materials

Part #

Quantity

Description

720-00011

1 Universal L Bracket, aluminum

700-00024

1

Lock-nut, #4-40

700-00028

4

Screw, #4-40, pan-head, 1/4”

721-00060

1

ActivityBot veho360 speaker bracket

Additional Items Required



Built and tested ActivityBot robot (#32500)

 veho360 speaker (#900-00018)

 Parallax Screwdriver (included in the ActivityBot kit) or #1 Phillips screwdriver

 Parallax Combination Wrench (included in the ActivityBot kit) or similar

Assembly Instructions

STEP 1

Insert two screws through

the longer arm of the

aluminum L bracket, and

align speaker bracket

holes with the screws, as

shown at right.

Notice the U-shape goes

to the right. You can put

one screw in the top hole

and one in the slot (as

shown), or put both in the

slot. The choice is yours.

STEP 2

With the screwdriver,

drive the screws into the

holes in the speaker

bracket. It is made of

Delrin, so the screws will

self-tap and stay firmly in

place without needing

nuts.

STEP 3

Insert a screw through the

outer hole in the shorter

arm of the L bracket.

Drive the screw into the

lock-nut, using the wrench

to hold the nut securely.

STEP 4

Remove the screw from

the bottom left corner of

the Activity Board, the one

closest to the headphone

jack.

Place the L bracket on the

board so the nut is

hanging off, towards the

back of the robot.

Thread a screw through

the L bracket, through the

board, and into the

standoff below.

STEP 5

Gently twist the veho360 speaker to open it.

Slide the middle of the speaker over the speaker

bracket, with the cord facing towards the front

of the robot.

Plug the speaker into the audio jack on the

Activity Board.

725-32905

725-32905

Products related to this Datasheet