XG2
Flat Cable Connectors for PCBs
1
Achieve Total Cost Reduction through
High-density Mounting and Reduced
Wiring
■ IDC connections allow you to wire all terminals at
once without terminating the cable.
■ Can be DIP-soldered directly to the circuit board.
■ Small size (height 5.8 mm, width 6.8 mm) allows
more efficient use of circuit board space.
■ Uses a 2.54-mm grid terminal arrangement for
easier design of circuits.
■ Type: standard and reverse.
■ Uses UL94 V-0 approved insulation material.
■ The IDC Tool has Attachments for all terminals.
The result is efficient, labor-saving wiring.
■ Terminal Arrangement
■ Ratings and Characteristics
■ Cross-sectional View of Terminal
■ Materials and Finish
■ Applicable Wires
1.27-mm pitch, AWG28, 7-strand flat cable.
• UL2651 (standard cable)
• UL20012 (folding cable)
• UL20028 (color-code cable)
RoHS Compliant
Cable No.
Cable No.
Cable No.
Cable No.
Cable number arrangement
(Top View: Component Mounting Side)
Cable number arrangement
(Top View: Component Mounting Side)
The contact numbers are not
marked on the Connector. If the
cables are numbered from 1 starting
from the edge, the relationship
between the wires and the terminals
would be as shown at the right.
Standard Terminal
Arrangement
Reverse Terminal
Arrangement
Rated current 1 A
Rated voltage 250 VAC
Contact resistance 15 mΩ max. (at 20 mV, 100 mA max.)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength 500 VAC for 1 min (leakage current:
1mA max.)
Ambient operating
temperature
−55 to 85°C (with no icing at low temper-
ature)
0.6 dia.
Base Fiber-glass reinforced PBT resin
(UL94 V-0)/black
Contacts Mating
end
Copper alloy/nickel base, 2.0-μm tin
plating
Terminals Copper alloy/nickel base, flash gold
plated
Cover Fiber-glass reinforced PBT resin
(UL94 V-0)/black