Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
Litho in USA.
© 3M 2002 78-8126-0389-8-A
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
Engineering Specification
Crimp-Type Female Disconnects shall, electrically and
mechanically, connect permanently to a prestripped
end of a stranded copper wire; and have a tongue
portion with fingers which grip a Male Disconnect in a
separable, reusable manner, forming a Quick Connect
Wiring Termination.
The connector line shall offer tongue variations (sized
to grip bullet-style Male Tabs 0.156˝ diameter per
ANSI/NEMA CD-2) and barrel variations in wire
(AWG) size (22-18, 16-14) and construction (vinyl
insulated, nylon fully insulated, etc.). The female
disconnects shall have regulatory agency coverage (UL
Listing, CSA Certification). The tongue portion shall
be marked with the wire range and manufacturer’s
symbol ().
The Nylon Fully Insulated Bullet-Style Female
Disconnect shall be tin-plated 0.016˝ thick brass with a
receptacle for gripping a bullet-style Male Tab of
diameter 0.156˝ per ANSI/NEMA CD-2 and a 0.250˝
long barrel with a tin-plated brass, funnel entry
insulation grip, covered by a molded nylon funnel
entry sleeve, which extends to cover the tongue, color
coded and sized for a specified (AWG) wire range (red,
22-18; blue, 16-14).
Insulated connectors shall be UL Listed and CSA
Certified for 600 V building wire: 1000 V signs or
lighting fixtures (luminaires) and temperature rated
221˚F (105˚C) maximum.
3M and Scotchlok are trademarks of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
