2
Electrical Specications
1. Small/Large -signal data measured in a fully de-embedded test xture form TA = 25°C.
2. Pre-assembly into package performance veried 100% on-wafer per AMMC-6530 published specications.
3. This nal package part performance is veried by a functional test correlated to actual performance at one or more
frequencies.
4. Specications are derived from measurements in a 50 Ω test environment. Aspects of the amplier performance
may be improved over a more narrow bandwidth by application of additional conjugate, linearity, or low noise
(Гopt) matching.
5. NF is measure on-wafer. Additional bond wires (-0.2nH) at Input could improve NF at some frequencies.
Table 1. RF Electrical Characteristics
[1,2]
TA=25°C, Zo=50 Ω
Parameter
Frequency
=7GHz
Frequency
=16GHz
Frequency
=25GHz
Frequency
=34GHz Unit Comment
Minimum Attenuation
(Reference State)
5 2.5 3.5 3.5 dB Small Signal S21
Vc=0V
Maximum Attenuation 23.0 22.0 22.5 23.5 dB Small Signal S21
Vc=0V
Frequency <45 Typical
RLin and RLout
at Reference State
10 dB Vc=0V
RLin and RLout
at Maximum State
10 dB Vc=1.0V
Notes:
1. All tested parameters guaranteed with measurement accuracy ±2.5dB for Min Attenuation of 7GHz , ±1 for Min Attenuation of 16, 25GHz &
34GHz, ±3 for Max Attenuation of 7GHz, and ±2 for Max Attenuation of 16GHz, 25GHz &34GHz.
Table 2. Recommended Operating Range
1. Ambient operational temperature TA = 25°C unless otherwise noted.
2. Data obtained from on-wafer measurement
Description Min. Typical Max. Unit Test Condition
VC Control Current (Min Attenuation),
Ic_ref
0 uA Vc=0V
VC Control Current (Max Attenuation),
Ic _ref
150 uA Vc=1.0V
Table 3. Absolute Minimum and Maximum Ratings
[1]
Parameter Min. Max. Unit Comments
Voltage to Control Attenuation, Vc 0 1.6 V
RF Input Power, Pin 27 dBm
Operating Channel Temperature, Tch +150 dB
Storage Temperature, Tstg -40 +150 °C
Maximum Assembly Temperature, Tmax 300 °C 60 second maximum
Notes:
1. Operation in excess of any one of these conditions may result in permanent damage to this device. The absolute maximum ratings for VC and Pin
were determined at an ambient temperature of 25°C unless noted otherwise..